1/2" jumper cable,N male to DIN male connector
1.N male to DIN male jumper cable for 1/2" coaxial flexible cable:
It is used for transmitting and receiving as the main feeder or sub-feeder in mobile communication systerm. It can also be used in other elictronic decives to transmitting high-frequency signal as low-loss transmission line.
2.Parameters:
N Male to DIN Male Jumper cable for 1/2" Flexible | |||
Cable Type | ZD-Juper1//2-NM-DINM | ||
Jumper Length | Customized according to demand | ||
Inner Conductor | Copper-Clad Aluminum Wire(Diameter 4.80 mm) | ||
Dielectric | Physical Foam Polyethylene(Diameter 12.30mm) | ||
Outer Conductor | Corrugated Copper Tube(Diameter 13.80mm) | ||
Jacket | Black PE (Diameter 15.70mm) | ||
ConnectorA,B | DIN Type Straight male/N type Straight male | ||
Inner Conductor Pin | Brass/Silver Plating | ||
Body&Outer Conductor | Brass/Trimetal Plating | ||
Insulator | PTFE | ||
Gasket | Silicon Rubber | ||
Characteristics Impedance | 50 Ohm | ||
Frequency Range | DC~7.5GHz | ||
Insulation Resistance | ≥5000MΩ | ||
@DC~3.0GHz | ≤0.15*L+0.2dB | ||
@DC~2.5GHz | ≤1.10 | ||
@2.5~3.0GHz | ≤1.15 | ||
PIM3 | ≤-155dBc | ||
Temperature Range | -40°C to +85°C |