Transport Media Microbial Culture Kit Anal Sampling Device Fecal Sampling Kit Disposable Sampler

Product introduction:

The HUACHENYANG Transport System is the latest bacteriological transport swab that provides the ability and maintains the survival rate of discerning aerobic or anaerobic bacteria during collection, transport or indoor storage at the temperatures necessary for potassium chloride, magnesium chloride and calcium chloride ions, a suitable buffer can keep the sample morphology intact to the greatest extent, so that it can be fully suspended and dispersed. The specificity of using different reagent formulations and compatible swabs allows for larger sample collection, better transport and preservation.

Product advantages:

With excellent sample collection and release capabilities, it can quickly adsorb small samples with high release efficiency. The duration of positive nucleic acid detection in anal swabs is longer than that in oral and pharyngeal swabs, which can supplement the detection loopholes of oral and pharyngeal swabs to prevent missed diagnosis. In the past oral and throat swab tests, samples were taken through the oral cavity or nasal cavity, which was an uncomfortable experience for the subjects. After sampling, some people would experience nausea, vomiting, nausea, etc., while The anal swab test will not have the above situation, but it will test the psychological endurance of the subjects. Anal swabs have a higher test duration and theoretically more accurately test samples

Product parameter:

It consists of a swab and a test tube containing a preservation solution. Provided non-sterile.

Product Instructions:

1. Take out the sampling swab, do not touch other parts or other places (so as not to contaminate the swab).

2. Gently insert the swab 3-5 cm into the anus.

3. Scrape a sufficient number of samples directly with a sampling rod, and the ratio of sample to preservation solution is 0.01-0.25:1.

4. Use the swab in the anus for 4~5 turns and then gently pull out the swab.

5. Put the sampling swab into the test tube containing the preservation solution, and quickly stir about 10 times to elute the sample on the swab. Then push the sampling swab head from the tail and tighten the cap