CLRC63201T RFID READER IC 13.56MHZ 32SO ISO Integrated circuits CLRC63201T0FE112

ISO Integrated circuits CLRC63201T0FE112 Description:

RFID Reader IC 13.56MHz ISO 14443, ISO 15693, MIFARE SPI 3.3V ~ 5V

Environmental & Export Classifications

ISO Integrated circuits CLRC63201T0FE112 Description:

RFID Reader IC 13.56MHz ISO 14443, ISO 15693, MIFARE SPI 3.3V ~ 5V

The CLRC632 is a highly integrated reader IC for contactless communication at 13.56 MHz. The CLRC632 reader IC provides:

• outstanding modulation and demodulation for passive contactless communication

• a wide range of methods and protocols

• a small, fully integrated package

• pin compatibility with the MFRC500, MFRC530, MFRC531 and SLRC400 All protocol layers of the ISO/IEC 14443 A and ISO/IEC 14443 B communication standards are supported provided:

• additional components, such as the oscillator, power supply, coil etc. are correctly applied.

• standardized protocols, such as ISO/IEC 14443-4 and/or ISO/IEC 14443 B anticollision are correctly implemented

Specification:

Application :

Electronic payment systems

Identification systems

Access control systems

Subscriber services

Banking systems

Digital content systems

General information:

Highly integrated analog circuitry for demodulating and decoding card/label response

Buffered output drivers enable antenna connection using the minimum of external components

Proximity operating distance up to 100 mm

Supports both ISO/IEC 14443 A and ISO/IEC 14443 B standards

Supports MIFARE dual-interface card ICs and the MIFARE Mini, MIFARE 1K, MIFARE 4K protocols

Contactless communication at MIFARE higher baud rates (up to 424 kBd)

Supports both I-CODE1 and ISO/IEC 15693 protocols

Crypto1 and secure non-volatile internal key memory

Pin-compatible with the MFRC500, MFRC530, MFRC531 and the SLRC400

Parallel microprocessor interface with internal address latch and IRQ line

SPI compatibility  Flexible interrupt handling

Automatic detection of parallel microprocessor interface type

64-byte send and receive FIFO buffer

Hard reset with low power function

Software controlled Power-down mode

Programmable timer

Unique serial number

User programmable start-up configuration

Bit-oriented and byte oriented framing

Independent power supply pins for analog, digital and transmitter modules

Internal oscillator buffer optimized for low phase jitter enables 13.56 MHz quartz connection

Clock frequency filtering

3.3 V to 5 V operation for transmitter in short range and proximity applications

3.3 V or 5 V operation for the digital module

Images :