MachineU > China Products > Machinery > Cleaning Equipment > Cleaning Equipment Parts
Handheld Spray Nozzle Tester
Handheld Spray Nozzle Tester
Specifications
Brand Name :
KINGPO
MOQ :
1
Certification :
calibration certificate
Place of Origin :
China
Price :
To be quoted
Payment Terms :
T/T
Supply Ability :
10 sets per month
Delivery Time :
10 working days
Packaging Details :
safety box
Input power :
Single phase AC220V 50Hz
Moving shield :
Aluminum
Spray nozzle :
Brass
Pressure gauge :
50～150Kpa
pressure range :
0～0.25Mpa
Baffle :
movable
Description
Product Details

Standard description:

15 Moisture resistance

15.1 The enclosure of the appliance shall provide the degree of protection against moisture in accordance with the classification of the appliance.
Compliance is checked as specified in 15.1.1 taking into account 15.1.2, the appliance not being connected to the supply mains.
The appliance shall then withstand the electric strength test of 16.3 and inspection shall show that there is no trace of water on insulation which could result in a reduction of clearances and creepage distances below the values specified in clause 29.
NOTE The external enclosure is carefully wiped to remove any surplus water before inspection. Care has to be taken when dismantling to avoid displacing any water within the appliance. Ingress Protection Test Equipment
15.1.1 Appliances other than those classified IPX0 are subjected to the tests of IEC 60529 as follows:
– IPX1 appliances as described in subclause 14.2.1;
– IPX2 appliances as described in subclause 14.2.2;
– IPX3 appliances as described in subclause 14.2.3a;
− IPX4 appliances as described in subclause 14.2.4a;
– IPX5 appliances as described in subclause 14.2.5;
– IPX6 appliances as described in subclause 14.2.6;
– IPX7 appliances as described in subclause 14.2.7. For this test the appliance is immersed in water containing approximately 1 % NaCl.
NOTE The hand-held spray nozzle may be used for testing appliances that cannot be placed under the oscillating tube specified in IEC 60529.
Water valves containing live parts and that are incorporated in external hoses for connection of an appliance to the water mains are subjected to the test specified for IPX7 appliances. Ingress Protection Test Equipment

Standard:IEC60529 degree of protection provided by enclosures (IP Code) of the IPX3 and IPX4, IEC60884-1, IEC60335-1, IEC60598-1.

Application:It is used for the testing of IPX3 and IPX4.

Test sample:The test apparatus with water proof functions, such as electronic appliances, lamps, electrical cabinets, electrical components,car, motorcycle, electrical products (such as automotive instrument, all kinds of switches, micro motors, etc.)

Feature:The difference between IPX3 and IPX4 is that the baffle should be removed in the IPX4 test. To make the shell in every possible direction is splashing, this device can be used with a rotating table of the sample.

Ingress Protection Test Equipment

Parameters:

Item Parameter
Input power Single phase AC220V,50Hz
Water supply Water flow rate is ＞10L/min±5%, pressure is 50～150kpa clean water without inclusion.
Spray nozzle parameters

External diameter: Ф102mm

spherical diameter: SФ75.5mm

121 holes of Ф0.5mm;

1 hole at the centre

1 inner circles of 12 holes at 30°pitch

4 outer circles of 24 holes at 15°pitch

Moving shield-Aluminum

Spray nozzle-Brass
Water flow 10L/min±5%,Flow meter is adjustable
Pressure gauge 50～150Kpa,Range of pressure gauge 0～0.25Mpa
Baffle Removable
Site requirements

Dedicated IP waterproof test room,The ground should be flat with illumination

With good function of inflow and drainage.
Testing time Manual control, at least 5min
Handheld Spray Nozzle Tester

TAG:

waterproof tester,

material testing equipment,

environmental test chamber

Hot Tags: handheld spray nozzle tester, China, manufacturers, suppliers, factory, custom, wholesale, Blowing Dust Test Chamber, Winding A Flexible Pipe, IPX7 Immersion Test Chamber Glass Mould, IEC60335-2-24 Clause 21.102 Test Probe, Children Test Finger Probe 18 And 19, IEC60335-2-11 Figure 104 Surface Temperature Probe
Product tags

nozzle tester

,

metered spray equipment

,

handheld sprayer
Send your message to this supplier
Send Now

Handheld Spray Nozzle Tester

Ask Latest Price
Product Detail
Brand Name :
KINGPO
MOQ :
1
Certification :
calibration certificate
Place of Origin :
China
Price :
To be quoted
Payment Terms :
T/T
Contact Supplier
Handheld Spray Nozzle Tester

Dongguan Kingpo Technology Limited

Verified Supplier
4 Years
Since 2012
Business Type :
Manufacturer
Main Products :
IEC Test Equipment, Medical Testing Equipment, Ingress Protection Test Equipment
Employee Number :
150~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Ingress Protection Test Equipment
MachineU China Products Machinery Cleaning Equipment Cleaning Equipment Parts
Contact Supplier
Submit Requirement