IEC 60811-1-2 / ISO 188 IEC Test Equipment Aging oven 10℃ - 200℃

Product information:

It is conforms to ISO 188 ‘Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests’, clause 8.1 of IEC 60811-1-2 ‘Common test methods for insulating and sheathing materials of electric and optical cables — Part 1-2: General application — Thermal ageing methods’ and etc. .

The equipment is suitable for the heat resistance test of electrical insulating materials, the performance and parameters of electronic parts and plastic products under high temperature and atmospheric pressure

Parameters:

Heating system:

1. Far-infrared nickel alloy high-speed heating electric heater;

2. High temperature, ventilation completely independent system;

3. Temperature control output power is calculated by microcomputer to achieve high efficiency and high efficiency.

Control System:

1. Digital display LED touch button type PID microcomputer SSR output temperature controller

2. Accuracy: 0.1°C (display range)

3. Resolution: + 0.1 C;

4. Temperature sensor: PT100 platinum resistance thermometer;

5. Control method: thermal balance temperature adjustment method;

6. Temperature control adopts P.I.D＋S.S.R system co-channel coordination control;

7. With automatic calculation function, it can reduce inconvenience caused by human setting.

Ventilation Control:

1. Natural ventilation: ventilation times: 1 to 20 times/hour

2. Natural ventilation + forced ventilation: 1-100 times / hour

3. Forced air change control: Use air pump to inflate, by adjusting the flow rate of the air flow meter

Protection System:

Over-temperature protection, Timing protection, Overload protection, Fan overheat protection

Equipment Use Environment:

1. Ambient temperature: 5 ~ + 28 ℃ (Average temperature within 24 hours≤28℃) ；

2. Environmental humidity: ≤85%R.H；