Specifications
Brand Name :
Texas Instruments
Model Number :
TLV2372IDR
Certification :
ROHS
Place of Origin :
MEX
MOQ :
2500pcs/box
Price :
Negotiation
Payment Terms :
T/T, Western Union
Supply Ability :
10000pcs
Delivery Time :
3-5DAYS
Packaging Details :
2500PC/BOX
Manufacturer :
Manufacturer: Texas Instruments
Product Type :
Op Amps-Operational Amplifiers
Installation style :
SMD/SMT
Package / Box :
SOIC-8
Number of channels :
2 Channel
Supply voltage-max :
16 V
GBP-gain bandwidth product: :
3 MHz
Output current per channel :
16 mA
SR-Conversion rate :
2.4 V / us
Minimum working temperature :
-40C
Maximum working temperature :
+125c
Output type :
Rail to Rail
Ib-Input bias current :
60PA
Working power supply current :
550UA
Close :
No Shutdown
CMRR-Common Mode Rejection Ratio :
55 dB to 72 DB
en-input voltage noise density :
39 nV / sqrt Hz
Package :
REEL
Amplifier type :
General Purpose Amplifier
Height :
1.58MM
Input type :
Rail to Rail
Length :
4.9 mm
Product :
Operational Amplifiers
Power supply type :
Single, Dual
width :
3.91MM
Brand :
Texas Instruments
Dual supply voltage :
+/- 3 V, +/- 5 V
In—input noise current density :
0.0006 pA/sqrt Hz
Maximum dual supply voltage :
+/- 8 V
Minimum dual supply voltage :
+/- 1.35 V
Operating power supply voltage :
2.7 V to 16 V, +/- 1.35 V to +/- 8 V
Pd-power dissipation :
710 mW
PSRR-Power supply rejection ratio :
70 dB
Factory Pack Quantity :
2500
Subcategory :
Amplifier ICs
Vcm-common mode voltage :
:Negative Rail to Positive Rail
Voltage gain dB :
110 dB
Unit weight :
170 mg
Description

TLV237x 500-µA/Ch, 3-MHz Rail-to-Rail Input and Output Operational Amplifiers With Shutdow

1 1 Features 1• Rail-to-Rail Input and Output • Wide Bandwidth: 3 MHz • High Slew Rate: 2.4 V/μs • Supply Voltage Range: 2.7 V to 16 V • Supply Current: 550 μA/Channel • Low-Power Shutdown Mode – IDD(SHDN): 25 μA/Channel • Input Noise Voltage: 39 nV/√Hz • Input Bias Current: 1 pA • Specified Temperature Range: – −40°C to +125°C (Industrial Grade) • Ultra-Small Packaging: – 5- or 6-Pin SOT-23 (TLV2370, TLV2371) – 8- or 10-Pin MSOP (TLV2372, TLV2373) 2 Applications • White Goods • Handheld Test Equipment • Portable Blood Glucose Systems • Remote Sensing • Active Filters • Industrial Automation • Battery-Powered Electronics Operational Amplifier 3 Description The TLV237x single-supply operational amplifiers provide rail-to-rail input and output capability. The TLV237x takes the minimum operating supply voltage down to 2.7 V over the extended industrial temperature range while adding the rail-to-rail output swing feature. The TLV237x also provides 3-MHz bandwidth from only 550 μA. The maximum recommended supply voltage is 16 V, which allows the devices to be operated from (±8-V supplies down to ±1.35 V) a variety of rechargeable cells. The CMOS inputs enable use in high-impedance sensor interfaces, with the lower voltage operation making an ideal alternative for the TLC227x in battery-powered applications. The rail-to-rail input stage further increases its versatility. The TLV237x is the seventh member of a rapidly growing number of RRIO products available from TI, and it is the first to allow operation up to 16-V rails with good ac performance. All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package. The 2.7-V operation makes the TLV237x compatible with Li-Ion powered systems and the operating supply voltage range of many micro-power microcontrollers available today including TI’s MSP430. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) TLV237x PDIP (8) 9.81 mm × 6.35 mm PDIP (14) 19.30 mm × 6.35 mm SOIC (8) 4.90 mm × 3.91 mm SOIC (14) 8.65 mm × 3.91 mm TSSOP (14) 5.00 mm × 4.40 mm TSSOP (16) SOT-23 (6) 2.90 mm × 1.60 mm SOT-23 (5) VSSOP (8) 3.00 mm × 3.00 mm VSSOP (10) (1) For all available packages, see the orderable addendum at the end of the data sheet.

To achieve the levels of high performance of the TLV237x, follow proper printed-circuit board design techniques. A general set of guidelines is given in the following. • Ground planes—TI highly recommends using a ground plane on the board to provide all components with a low inductive ground connection. However, in the areas of the amplifier inputs and output, the ground plane can be removed to minimize the stray capacitance. • Proper power supply decoupling—Use a 6.8-μF tantalum capacitor in parallel with a 0.1-μF ceramic capacitor on each supply terminal. It may be possible to share the tantalum among several amplifiers depending on the application, but a 0.1-μF ceramic capacitor should always be used on the supply terminal of every amplifier. In addition, the 0.1-μF capacitor must be placed as close as possible to the supply terminal. As this distance increases, the inductance in the connecting trace makes the capacitor less effective. The designer should strive for distances of less than 0.1 inches between the device power terminals and the ceramic capacitors. • Sockets—Sockets can be used but are not recommended. The additional lead inductance in the socket pins will often lead to stability problems. Surface-mount packages soldered directly to the printed-circuit board is the best implementation. • Short trace runs and compact part placements—Optimum high performance is achieved when stray series inductance has been minimized. To realize this, the circuit layout must be made as compact as possible, thereby minimizing the length of all trace runs. Pay particular attention to the inverting input of the amplifier. Its length must be kept as short as possible. This helps to minimize stray capacitance at the input of the amplifier. • Surface-mount passive components—Using surface-mount passive components is recommended for high performance amplifier circuits for several reasons. First, because of the extremely low lead inductance of surface-mount components, the problem with stray series inductance is greatly reduced. Second, the small size of surface-mount components naturally leads to a more compact layout thereby minimizing both stray inductance and capacitance. If leaded components are used, TI recommends that the lead lengths be kept as short as possible. 2 Channel Operational Amplifier Op Amp TLV2372IDRG4 TLV2372ID Texas Instruments

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons.

If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your MOQ?

A: We provide you small MOQ for each item, it depends your specific order!

Q3. Do you test or check all your goods before delivery?

A: Yes, we have 100% test and check all goods before delivery.

Q4: How do you make our business long-term and good relationship?

We keep good quality and competitive price to ensure our customers benefit ;

We respect every customer as our friend and we sincerely do business and make friends with them,It's not something that can be replaced.

Q5: How to contact us?
A: Send your inquiry details in the below,Click "Send"Now!!!

Shenzhen Hongxinwei Technology Co., Ltd

To adopt new technology,to produce products of quality,to offer high-class service.

Improve the management system continuously to meet customer requirement for high-quality products and services.

Why choose us?

  • 100% new and originao with Advantage price
  • High efficiency
  • Fast Delivery
  • Professional team service
  • 10 Years Experience Electronic components
  • Electronic components Agent
  • Advantage logistic discount
  • Excellent After-sales Service
Send your message to this supplier
Send Now

2 Channel Operational Amplifier Op Amp TLV2372IDRG4 TLV2372ID Texas Instruments

Ask Latest Price
Brand Name :
Texas Instruments
Model Number :
TLV2372IDR
Certification :
ROHS
Place of Origin :
MEX
MOQ :
2500pcs/box
Price :
Negotiation
Contact Supplier
2 Channel Operational Amplifier Op Amp TLV2372IDRG4 TLV2372ID Texas Instruments
2 Channel Operational Amplifier Op Amp TLV2372IDRG4 TLV2372ID Texas Instruments
2 Channel Operational Amplifier Op Amp TLV2372IDRG4 TLV2372ID Texas Instruments
2 Channel Operational Amplifier Op Amp TLV2372IDRG4 TLV2372ID Texas Instruments
2 Channel Operational Amplifier Op Amp TLV2372IDRG4 TLV2372ID Texas Instruments

Shenzhen Hongxinwei Technology Co., Ltd

Site Member
6 Years
guangdong, shenzhen
Since 1998
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Total Annual :
50000000-70000000
Employee Number :
100~200
Certification Level :
Site Member
Contact Supplier
Submit Requirement