Absolute Maximum Ratings(Ta=25℃ )
Symbol | Term | Values | Unit |
VS MAX. | Max. supply voltage primary | +16 | V |
IS MAX. | Max. supply current primary | 1450 | mA |
PDC/DC | Total power of DC/DC isolation power output | 25 | W |
Vin | Max. PWM input level VinA; VinB | VS+0.5 | V |
ViH | Max. logic signal input voltage (Mode select;reset signal;external error) | VS+0.5 | V |
IOC | Max. logic signal output currect (Open-collector output current) | 10 | mA |
IoutAV | Output average current per channel | 450 | mA |
IoutPEAK | Output peak current per channel | ±80 | A |
VCES | IGBT collector-emitter voltage | 1700 | V |
Visol IO | Isolation voltage IN-OUT(10 sec.AC) | 4000 | V |
Visol AB | Isolation voltage OUT A-OUT B(10 sec.AC) | 4000 | V |
RGon/off min | Minimal Rgon/Rgoff | 0.32 | Ω |
Qout/pulse | Charge per pulse | ±60① | μC |
dv/dt | Rate of rise and fall of voltage | 75 | kV/μs |
fSWmax | Max. working frequency | 50 | kHz |
Top | Operating temperature | -40...+85 | ℃ |
Tstg. | Storage temperatature | -45...+85 | ℃ |
Electrical Characteristics(Ta=25℃ )
Symbol | Term | Parameter | Unit | |||
Min. | Typ. | Max. | Rec. | |||
VS | Supply voltage primary | 14.5 | 15 | 15.5 | 15 | V |
IS | No-load currect primary fSW=0kHz fSW=20kHz fSW=100kHz | - 130 150 180 | mA | |||
VIT+ | Input high level: 15V level 5V level | -- 12 3.2 | V | |||
VIT- | Input low level: 15V level 5V level | -- 4.5 1.9 | V | |||
Rin | Input resistance | 33 | kΩ | |||
VG(on) | Turn-on gate voltage | +15 | V | |||
VG(off) | Turn-off gate voltage | -10 | V | |||
td(on)IO | IN-OUT turn-on delay time | 650 | ns | |||
td(off)IO | IN-OUT turn-off delay time | 600 | ns | |||
td(err) | Error signal return delay time VCEerror happen-error signal output | 110 | ns | |||
tmd | Narrow pulse restrained | 400 | ns | |||
VCEstat | Reference voltage for VCEmonitoring VCE=1700V VCE=1200V | 2 - - | 6.8 - - | - 6.2 5.3 | V | |
VLevel | Logic level (External error input; resetsignal; mode select) | +8 | +15 | V | ||
tpReset | Vininput both Low reset time | 10 | μs | |||
tTD | Dead time adjusted from factory (half-bridge interlock mode) | .05② | 5 | μs | ||
CPS | Primary to secondary capacitance | 12 | pf |
① This value can be expanded externally (on adapter board) by pins.
② Attention! Pins XS.3,7 should not connect to power supply VSor GND directly,Min.RTDis 1kΩ and corresponding tTDis about 0.05μs.
● Single or bridge circuit
● Inverter
● Welding machine
● Induction heating
● Converter
● High power UPS
● High power high frequency SMPS