Industrial DIN-rail mounting layer 2 unmanaged 5-port full gigabit PoE switch
Introduction
IPS2000 series are 5-port full gigabit layer 2 unmanaged industrial PoE Ethernet switches and the PoE power supply is up to the protocol standard of IEEE 802.3af/at. This series have three products and provide gigabit copper ports, fiber ports, SFP slots and PoE copper ports. They adopt DIN-Rail mounting or wall mounting, which can meet the requirements of different scenes.
The DIP switch could implement the switching of standard PoE power supply modes (IEEE 802.3af or IEEE 802.3at) as well as flow control, jumbo frames and RJ45 Forced 100M. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, railway transportation, smart city, safe city, new energy, aerospace, intelligent manufacturing, military project and other industrial fields.
Specification
Standard & Protocol
|
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.3af for PoE IEEE 802.3at for PoE+
|
PoE
| The maximum power consumption of PoE port: 30W The power supply pin of PoE: V-, V-, V+, V+ correspond to Pin 1, 2, 3, 6 |
Interface |
Copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning Fiber port: 1000Base-FX, SC/ST/FC optional SFP slot: 100/1000Base-SFP
|
LED Indicator |
Running Indicator, Port Indicator, PoE Indicator
|
Switch Property |
Transmission mode: store and forward MAC address: 8K Packet buffer size: 1Mbit Backplane bandwidth: 14G Switch time delay: <10μs
|
Power Requirement |
12~48VDC(PoE 48VDC), 3-pin 7.62mm pitch terminal blocks Support 3A over-current protection reverse polarity protection
|
Environmental Limit |
Operating temperature range: -40~75℃ Storage temperature range: -40~85℃ Relative humidity: 5%~95% (no condensation)
|
Physical Characteristic |
Housing: IP40 protection, metal Installation: DIN-Rail mounting or wall mounting Dimension (W x H x D): 35mm×110mm×95mm Weight: ≤400g
|
Industrial Standard |
IEC 61000-4-2 (ESD), Level 3 Air discharge: ±8kV Contact discharge: ±6kV
IEC 61000-4-4 (EFT), Level 3
IEC 61000-4-5 (Surge), Level 3
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6
|
Certification |
CE, FCC, RoHS
|
Warranty |
5 years
|
Dimension
Unit:mm
Ordering Information
Available Models | Gigabit SFP Slot | Gigabit Fiber Port | Gigabit Copper Port | Gigabit POE Port | Power Supply Range |
IPS2000G-1GT-4GPOE | 0 | 0 | 1 | 4 | 12~48VDC (PoE 48VDC) |
IPS2000G-1GS-4GPOE | 1 | 0 | 0 | 4 | |
IPS2000G-1GF-4GPOE | 0 | 1 | 0 | 4 |