1-port 100M LAN + 1-port 100M WAN 2.4GHz industrial wireless AP
Introduction
IAP2312N-2T is an industrial wireless AP, it supports route, AP, bridge, client four working modes and IEEE802.11b/g/n wireless technology, and wireless transmission speed reaches 300Mbps, which can meet fast data transmission demands. The device supports WEP SHARED, WPA2-PSK and other wireless cipher mode; it possesses SSID concealing, wireless user isolation, MAC address filtering, ARP binding, DMZ setting and other security strategies. Supports virtual AP, that is, an AP device supports multiple SSID; supports seamless roaming, that is, in the WLAN (Wireless Local Area Network) constituted by multiple AP, user can achieve seamless roaming without conducting the switching operation. The product adopts fanless, low power consumption, industrial grade design, all components adopt industrial grade components, which can achieve high reliability and adapt to harsh industrial environment, -40~75℃ working temperature range, it can meet various industrial scenes demands.
Features and Benefits
Specification
Standard & Protocol |
Standard: IEEE802.3, IEEE802.3u, IEEE802.11b/g/n, IEEE802.11i, IEEE802.11r, IEEE802.3af/at Protocol: TCP/IP, DHCP, PPPOE, ICMP, ARP, HTTP
|
Wireless Transmission Speed |
802.11n: 6.5~300Mbps 802.11b: 11/5.5/2/1Mbps 802.11g: 54/48/36/24/18/12/9/6Mbps
|
Radio Frequency |
Channel: 2.412GHz~2.4835GHz RF power output: 20dBm Receiving sensitivity: 802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7 802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7 802.11g: -91dBm@6Mbps, -72dBm@54Mbps 802.11b: -93dBm@1Mbps, -87dBm@11Mbps Transmitted power: 802.11n_HT40: 20dBm@MCS0, 20dBm@MCS7 802.11n_HT20: 20dBm@MCS0, 20dBm@MCS7 802.11g: 20dBm@6Mbps, 20dBm@54Mbps 802.11b: 20dBm@1Mbps, 20dBm@11Mbps Modulation system: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
|
Interface |
LAN port: 1-way 10/100Base-T(X) RJ45 port WAN port: 1-way 10/100Base-T(X) RJ45 port, supports POE48VDC power supply input Antenna: 2 RP-SMA (Female) interfaces
|
Transfer distance
|
Twisted cable: 100M (standard CAT5/CAT5e cable)
|
LED Indicator |
Device running status indicator: RUN Power supply connection status indicator: PI POE power supply status indicator: PoE Alarm indicator: ALM Wireless port connection indicator: Wireless signal intensity indicator: LAN port connection status indicator: LAN WAN port connection status indicator: WAN
|
Power Requirement |
Power supply input: 12~48VDC or 48VDC POE power supply Input mode: 3-pin 5.08mm pitch terminal block Power supply supports non-polarity connection
|
Power Consumption |
No-load consumption: < 2W Full-load consumption: < 3W
|
Environmental Limit |
Working temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation)
|
Physical Characteristic |
Shell: IP40 protection grade, corrugated high strength mental shell Mounting method: DIN-rail or wall-mounted (optional accessories) Size (L×W×H): 138mm×110mm×35mm Weight: 0.57kg
|
Industrial Standard |
EMI: FCC Part 15, CISPR (EN55022) class A EMS: IEC 61000-4-2 (ESD), Level 3 Contact: 6 kV Air: 8 kV IEC 61000-4-4 (EFT), Level 3 Power: 2 kV Signal: 1 kV IEC 61000-4-5 (Surge), Level 3 Power: common mode 2 kV different mode 1 kV Signal: common mode 2 kV different mode 1 kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6
|
Certification |
CE, FCC, RoHS
|
Warranty |
5 years
|
Dimension
Unit:mm
Ordering Information
Available Models | WAN | LAN | Antenna | Power Supply |
IAP2312N-2T | 1 | 1 | 2 | 12~48VDC or 48VDC POE |