1-port USB to RS-232 Converter
Introduction
USB232 is a passive pocket USB to RS-232 interface converter, which can achieve bilateral switching of data between USB interface and RS-232 serial port without external power supply. The product supports 1 USB interface and 1 RS-232 serial port. Interface is equipped with 600W surge protection and 15kV electrostatic protection, which can effectively protect the device from damage.
The product provides matched driver program software; USB interface connected to PC will make up a serial COM port in the computer system. PC host can communicate with RS-232 device via virtual COM port.
Specification
Serial Port |
Standard: EIA RS-232C Quantity of serial port: 1 RS-232 serial port Serial port signal: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS, RI Baud rate: 300bps~115200bps Interface form: adopt DB9, Male; Transmission distance: 15m Interface protection: 600W surge protection, 15kV electrostatic protection
|
USB Port
|
Standard: USB 1.1, USB 2.0, USB CDC V1.1 Quantity of interfaces: 1 USB interface USB signal: VCC, DATA+, DATA-, GND Transmission rate: high speed 480Mbps, full speed 12Mbps Interface form: USB A-type plug, Female Transmission distance: 5m
|
Operating System |
Windows 98/ME/2000/XP/7, Linux v5.0
|
Power Requirement
|
USB interface power supply, without external power supply
|
Power Consumption |
Static power consumption: ≤80mA Dynamic power consumption (mean value): ≤150mA
|
Environmental Limit |
Operating temperature: -20~60℃ Storage temperature: -25~85℃ Relative humidity: 5%~95% (no condensation)
|
Physical Characteristic |
Housing: plastic Dimension (W x H x D): 33mm×18mm×72mm (cable length 1.5m) Weight: 70g
|
Certification |
CE, FCC, RoHS
|
Warranty |
3 years
|
Ordering Information
Available Models | RS-232 | USB | Power Supply |
USB232 | 1 | 1 |
- |