Optical Isolation bidirectional RS-232 to RS-485/422 converter
Introduction
MODEL485P is a RS-232 to RS-485/422 interface converter that can achieve bidirectional conversion between RS-232 and RS-485/422. It provides 1 RS-232 serial port and 1 RS-485/422 serial port. The RS-485/422 supports serial port self-adaption technology that can identify RS-485/422 serial port automatically without the need of setting the switch. Serial ports are equipped with 1500W surge protection, 15kV electrostatic protection and 2500V photoelectric isolation protection, which can effectively avoid surge and lightning strike. The device also adopts wall mounting, which can meet the requirements of different scenes.
Hardware adopts fanless, low power consumption, wide temperature and voltage design. It can be wildly used in indoor and outdoor system like attendance, entrance guard, cloud platform control, food selling and parking lot, etc.
Specification
Serial Port |
Standard: EIA RS-232C, RS-485, RS-422 Serial port quantity: 1 RS-232 serial port, 1 RS-485/422 serial port RS-232 signal: TXD, RXD, GND RS-485 signal: 485+, 485-, GND RS-422 signal: T+, T-, R+, R-, GND Baud rate: 110bps~115200bps Data bit: 8bit Stop bit: 1bit, 1.5bit, 2bit Check bit: None, Odd, Even, Mask, Space Interface type: RS-232 serial port, adopts DB9, Female; RS-485/422 serial port, adopt 5-pin 5.08mm pitch terminal blocks, DB9 Male or RJ45 Transmission distance: RS-232 serial port, 15m; RS-485/422 serial port, 1800m (115200bps) Direction control: RS-485 adopts automatic data flow control technology which can detect and control data transmission direction automatically Load capacity: RS-485 supports 32-point polling environment (128-point could be customized) Interface protection: 1500W surge protection, 15kV electrostatic protection Photoelectric isolation: 2500V
|
LED Indicator |
Power supply indicator, serial port data sending/receiving indicator
|
Power Requirement
|
9VDC, DC round head RS-232 port obtains power from the TXD, RTS, DTR signal of RS-232
|
Power Consumption |
Static power consumption: ≤70mA Dynamic power consumption (mean): ≤200mA
|
Environmental Limit |
Operating temperature: -20~75℃ Storage temperature: -25~85℃ Relative humidity: 5%~95%(no condensation)
|
Physical Characteristic |
Housing: metal, IP30 protection Installation: wall mounting Dimension (W x H x D): 62.4mm×22mm×93mm Weight: 200g
|
Certification |
CE, FCC, RoHS
|
Warranty |
3 years
|
Dimension
Unit:mm
Ordering Information
Available Models | RS-232 | RS-485/422 | Power Supply |
MODEL485P | 1 | 1 | 9VDC |