Introduction
IES2008 is 8-port 100M unmanaged industrial Ethernet switch. It provides 100M copper ports and adopts DIN-Rail mounting or wall mounting, which can meet the requirements of different application scenes.
The DIP switch can achieve loop detection, storm suppression, one-key VLAN and flow control. Hardware adopts fanless, low power consumption, and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in railway transportation, smart city, safe city, new energy, intelligent manufacturing, and other industrial fields.
Specification
Standard & Protocol
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for flow control
Interface
Copper port: 10/100Base-T(X), RJ45, Full/Half Duplex Mode, MDI/MDI-X Autotunning
LED Indicator Power Supply Indicator, Port Indicator
Switch Property
Transmission mode: store and forward
MAC address: 2K
Backplane bandwidth: 1.6Gbps
Switch time delay: <10μs
Power Requirement
12~48VDC/24VAC, 3-pin 5.08mm pitch terminal blocks
Anti-reverse connection protection, built-in over-current 3.0A protection
Power Consumption
No-load: 0.5W@24VDC
Full-load: 1.4W@24VDC
Environmental Limit
Operating temperature range: -40~75℃
Storage temperature range: -40~85℃
Relative humidity: 5%~95%(no condensation)
Physical Characteristic
Housing: IP40 protection, metal
Installation: DIN-Rail mounting or wall mounting
Dimension (W x H x D): 40.6mm×103mm×78mm
Industrial Standard
IEC 61000-4-2 (ESD)
Air discharge: ±8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT)
Power supply: ±2kV
Ethernet port: ±1kV
IEC 61000-4-5 (Surge)
Power supply: common mode±2kV, differential mode±1kV
Ethernet port: common mode±2kV, differential mode±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS
Warranty
5 years
MTBF
540249 hrs
Ordering Information
Available Models |
100M Copper Port |
Power Supply Range |
IES2008 |
8 |
12~48VDC/24VAC |