Astra OsseoSpeed NP 3.0mm Dental Implant Titanium Screw

Astra OsseoSpeed® Dental Implant Titanium Screw

Astra OsseoSpeed®

* NP 3.0mm

* RP 3.5-4.0mm

* WP 4.5-5.0mm

Compatible driver = Screwdriver Hex 1.27mm

Material:
Ti 6AI-4V ELI (Supply from Germany)

Feature:
- Accuracy, lighting intensity
- Identical to the original screw design
- Tool inspection with 150% of the original torque value
- Hand inspection of the threaded part

Their design ensures a perfect fit with standard accessories as well as with special CAD / CAM systems for structures, bridges and special abutments, bridges, bars, etc.

Approved by CE, ISO 9001, ISO 13485

Points of Astra OsseoSpeed™ Screw:

Each platform diameter group (3.0), (3.5/4.0), (4.5/5.0) has its own specific screw and the screws are not interchangeable from platform diameter to platform diameter. Final screws are included with the abutments as a kit but also available separately. No differentiating markings or color coding is present on any of the silver colored final screws.

All screws are torqued with a 0.050 hex driver to a platform diameter specific torque value (3.0 15Ncm, 3.5/4.0 20Ncm, 4.5/5.0 25Ncm). Laboratory screws are available and are color coded in accordance with the platform diameter group color identification scheme (3.0 yellow, 3.5/4.0 aqua, 4.5/5.0 lilac). DesignLine™ abutments (TiDesign™, ZirDesign™, CastDesign™, TempDesign™) share the same platform dependent screws.

Angled UniAbutment screws for the UniAbutments themselves are included with each UniAbutment to make a complete kit. Two implant/abutment platform diameter (3.5/4.0, 4.5/5.0) specific screws are produced and separately available for purchase. Screws for UniAbutment UCLA's (20°, 45°, angled) are much smaller than regular abutment screws. Each UCLA is packaged with a hexed (0.050 hex) final screw and a separate slotted final screw is offered separately. The UCLA screws are torqued to 15Ncm only.