Zimmer Screw Vent Ti 6AI 4V ELI 1.27mm Hex Implant Abutment

Zimmer Screw-Vent® Titanium Straight Abutment Compatible

NP 3.5mm/ RP 4.5mm/ WP 5.7mm

Desciption:

This staight abutment comes with a screw that takes a .050/1.27mm hex driver

This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)

Material:
Ti 6AI-4V ELI (Supply from Germany)

Feature:

* Titanium interface abutment
* 1pc Screw Included

* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility

* Can production Custom interface

Approved by CE, ISO 9001, ISO 13485

Points of Zimmer Tapered Screw-Vent® (TSV), Screw-Vent® Abutment:

Titanium contoured Hex-Lock® abutments are machined with a sloping collar as straight (Fig.1) and angled (17°, Fig.2) versions. Both the angle and lowest point of the slope coincide with a flat side of the indexing feature (hexagon) of the abutment. None of the abutments are color coded or otherwise marked for platform diameter identification. Abutment screws are trapped at will inside the abutment due to engineering ingenuity and replaceable in case of screw failure.

Several collar heights are offered for all three implant/abutment interface platform diameters (3.5, 4.5, 5.7mm). The listed collar height is measured at the lowest point of the sloping collar. 3.5mm platform abutments are produced with a 4.5mm emergence profile diameter and 4.5mm platform abutments are available in two emergence profiles of 4.5 and 5.5mm while 5.7mm platform abutments are fabricated with a emergence profile of 6.5mm. Straight abutments are provided with a choice of three collar heights (1, 2, 3mm) and angled abutments are available in two collar heights of 1 and 2mm. Each abutment is packaged with a final fixation screw to make a complete kit.