2400mm length Crimped spear metal garrison fence supplier

Product brief introduction

1. Heavy duty Crimp top security fence in Black colour only

2.Width 2400mm x Height 2100mm Crimp top diamond shape

3.40x40x1.6mm top rail, 25x25x1.2mm Verticals

4. There are 17 vertical pickets 25x25mm with diamond crimped on top.

5. The gap in between the pickets is 110mm

6.60x60x2mm thick post - these are 3m long each not 2.6m long as others supply.

7. NoRmal fence powder coated brackets

8. Security fence brackets ( powder coated )

9. Caps for 60x60 posts (powder coated )

10. Phosphate treated before powder coating (Very Important) - Not many suppliers even know about this process.

11. All panels are fully protected

Product detailed introduction

1) Our panels are made out of the thicker material top and bottom rails 40x40x1.6and 25x25x1.2 for all verticals

2) The gap in between the verticals is 110mm compared to wider gaps with others.

3) We use for all our panels galvanized material only.

4) Very important is that we phosphate wash our panels before powder coating which means a very high-quality powder coating which will long last many many years compared to my competitors.

Usages:
Widely used in villas, community, gardens, schools, factories and other flower beds, lawns, industrial and mining enterprises, financial institutions, sports stadiums, convention centers, squares, roads, balconies, residential use, its flowing lines, simple and beautiful and full of rich modern residential sensual, garden Light, villas era of high-grade. Simple installation, easy maintenance, easy to clean, affordable, eliminating maintenance.

Common specification:

Square pipe:

Tubular fence:

	Panel height(mm)	From 900-1800
	Panel width(mm)	2400 or 300
	Rail	38*25*1.6mm
	Tube specs	16mm
	Tube spacing	90mm or 98mm centres
	Inground post height(mm)	From 1500 to 2400
	Flanged post height(mm)	From 1300 to 1900
	Standard post specification	50*-50*1.6mm 60*60*2.0mm

Note: Special specification is available at your request

The main manufacture process:

Assembled:

1>Cut Shot

2>Punching Holes

3>Acid-Washing

4>Rich-Zinc Powder Coating

5>Polyester Color Powder Coating

6>Assembly

7>packing

Welded:

1>Cut Shot

2>Welded

3>Acid-Washing

4>Rich-Zinc Powder Coating

5>Polyester Color Powder Coating

6>packing

The process of producing the fence: