Special PLC Hot Dip Galvanizing Plant For Tubes

Descriptions of Hot Dip Galvanizing Equipment:

Hot-Dip Galvanization is a type of galvanization. It is the process of coating iron and steel with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 449 °C.

Hot dip galvanizing is a process developed to prevent steel from corroding. Before the process can take place, the steel goes through a thorough chemical clean which removes all rust, oil and mill scale from the surface. When the cleaning solution has been rinsed off, the coating process can begin.

Hot dip galvanizing is a process in which an adherent, protective coating of zinc compounds is developed on the surface of iron and steel products by immersing them in a bath of molten zinc. ... Hot dip galvanized coatings are produced on a variety of steel mill products, using fully mechanized, mass production methods.

Steel Tubes Hot Dip Galvanizing Production line Including:

Transfer trolley

Fully enclosed pickling room

Transmission unit

Pretreatment Tanks

Acid mist treatment system

Galvanizing kettle

Nature gas (electricity / oil) heating furnace

Zinc fume Collecting system: Zinc Fume Enclosure

Zinc fume Processing system: offline pulse inverse blowing bag filter

Zinc powder treatment equipment

Zinc powder collecting enclosure

Flux regeneration system

Pipe Galvanizing Equipment including:

Pipe drying furnace, Galvanizing machine, Outlet pipe machine, Drawing machine, Translation column, Drawing track, Translation system, Guide rod inner blower, Steam heater, Keeping flat system, Cooling water tank, Spray, Print roller table, Package area, Electric control system, Compressed air system, Electric wire and cable.