Industrial Automatic Hot Dip Galvanizing Equipment Production Line

Descriptions of Hot-Dipped Galvanizing Line:

As an effective metal anti-corrosion method, it has been widely used in metal structure facilities in various industries. Hot-dip galvanizing is to immerse the derusted steel components in a molten zinc solution at a high temperature of about 600°C to attach a zinc layer to the surface of the steel components. The thickness of the zinc layer shall not be less than 65μm for thin plates under 5mm and no less than 86μm for thick plates. So as to achieve the purpose of anti-corrosion.

HOT GALVANIZATION - GUARANTEE OF LONG LIFE OF PRODUCT USE:

Corrosion leads to premature failure of expensive products and structures, to the destruction of technological processes and equipment downtime. A prepared product made of steel or cast iron is immersed in zinc melted at a temperature of 450 ° С, as a result of which the metal is coated, including cavities and hard-to-reach spots at the molecular level, and provides the metal with a long service life (from 50 to 80 years). The coating thickness will be from 40 microns.

HOT Galvanizing - Hot Galvanizing - THE MOST EFFECTIVE METHOD OF ANTI-CORROSION PROTECTION:

The zinc coating creates not only an anti-corrosion barrier with a thickness of 40 microns, but also provides electrochemical protection of steel. The latter is known as “sacrificial protection,” because zinc sacrifices itself to protect the steel on which it is applied. Zinc will continue to act in this way until the very last atom.

Even if the zinc coating is damaged due to the presence of a buffer layer (an alloy of two metals formed under the influence of high temperature during hot dip galvanizing), corrosion will not affect the base metal!

Advantages of Hot Dip Galvanizing Equipment:

1. Lower investment and production cost

2. Short construction periods
3. Quality reliable and Durable equipment, complies with current environmental standard
4. Low maintenance and easy operation
5. High galvanizing quality
6. Advanced environment protective system

7. Flexibility designing to meet the customers' requirements