MF-160KW-100KG Medium Frequency Induction Melting Furnace for Iron, Steel, Stainless Steel

Main Features:

1. Digital Medium Frequency Power Supply with S.S Steel Body Melting Furnace, Fast Melting, stable performance.

2. Electric Gear Tilt System, easy to pour out off the liquid from the furnace.

3. Front Panel use the LCD Touch Screen, Key and Power Switch, all digital display, can use Switch Signal( Electrical frequency signal) to control the machine start and stop, and control the power via PLC.

Visual Human-computer Interface makes the operator feel more intimate and intuitive.

4. Induction Heating Machine have remote control function and adopt digital circuit control, power regulation can be adjusted from 1% to 100% resolution, and digital PID temperature control module can be configured to set the target temperature of workpiece (infrared temperature measurement automatically)

5. There are 5 working model, manual, timer, Fixed temperature, Constant temperature, section heating model.

1) Manual, On and stop in the Switch

2 ) Fixed Timer, setting heating time, after reach the heating time, then stop.

3) Fixed Temperature: Set the heating temperature that we need it, when the reach to the temperature that we need it, then stop the machine.

4) Constant Temperature: Adjust the heating power automatic to keep the same temperature to the workpiece.

5) Section Heating model, there are 8(S1-S8) options, each section can set the heating power, timer, temperature or constant temperature, temperature or constant temperature just can choose any one. Power as 0 means no need to heat, put theParamater that you need to set, if not choose that function then show"--

4.This machine has Memory Storage Function, There are 9 (P1-P9)programs, which can memorize 9 different workpiece in the machine, and select programs by clicking P(P1-P9). Can save much time if you have many workpiece in one machine, you can choose the programs (P1-P9) to fast working.

6. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
7. 100% Duty cycle, continuous working is allowed at maximum power output.
8.Simple to install, Installation can be done by unprofessional person very easily;

9. Energy Saving Up to 20-30% compare with SCR machine.

10. Light weight, small Size

Technical Parameters:

Summary and Application

The equipment is a frequency conversion device that converts three-phase power frequency current into a single-phase medium frequency current, through electromagnetic induction metal produced eddy current loss, and achieve the purpose of heating melting. For steel, iron, copper, aluminum, zinc, lead, ferrous and non-ferrous metal and alloy smelting, heat insulation, mainly used in the casting, melting industry.

Induction coil

We have 22 years experience in design and making, so we have rich experience for rate of the Height and diameter, for different tons induction coils have different rate of height and diameter, Computer optimized design ratio of height and diameter improves the efficiency of the electricity greatly.

The material of the induction coil: red copper T2

A,copper content 99.95％

B,intensity of tension 220Kg/cm

C,extension rate 45％

D,Hardness HB35

Application

Advantage of Compare the SCR Parallel induction heating machine:

1. Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type

2. Series Resonance IGBT type machine, will not interference other equipment working, No need special input transformer to working this machine. Will not pollute electricity Net.

3. Easy to Using, no need adjust the main board, no need to adjust capacitor's connection when you want to work other workpiece.

4. After we debug the machine in our company, then you can use it directly. Very convenient.

5. More stable performance.

6. Water Pressure and water Temperature Meter in the machine.

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.