40A Induction Soldering Machine 50KHZ High Frequency Induction Heater 2 Transformer with 1 Main Part

The Infineon modular induction heating equipment manufactured by our company is the newest high-tech product formed by adopting the most advanced power electronic power devices and unique converter control technology in the world with reasonable structure design.

Main Characteristic:

1. The machine main working for brazing, welding, heating, soldering application, one transfromer is working, the other is do the prepare jobs, improve heating efficiency.

2. Use foot switch to choose which transfromer to working. It is very convenient!

3. Front Panel use the LCD Touch Screen, Key and Power Switch, all digital display, can use Switch Signal( Electrical frequency signal) to control the machine start and stop, and control the power via PLC.

Visual Human-computer Interface makes the operator feel more intimate and intuitive.

4 . Induction Heating Machine have remote control function and adopt digital circuit control, power regulation can be adjusted from 1% to 100% resolution, and digital PID temperature control module can be configured to set the target temperature of workpiece (infrared temperature measurement automatically).

5 . There are 5 working model, manual, timer, Fixed temperature, Constant temperature, section heating model.

1). Manual, On and stop in the Switch

2). Fixed Timer, setting heating time, after reach the heating time, then stop.

3). Fixed Temperature: Set the heating temperature that we need it, when the reach to the temperature that we need it, then stop the machine.

4). Constant Temperature: Adjust the heating power automatic to keep the same temperature to the workpiece.

5). Section Heating model, there are 8(S1-S8) options, each section can set the heating power, timer, temperature or constant temperature, temperature or constant temperature just can choose any one. Power as 0 means no need to heat, put the

Paramater that you need to set, if not choose that function then show"--

6). This machine has Memory Storage Function, There are 9 (P1-P9)programs, which can memorize 9 different workpiece in the machine, and select programs by clicking P(P1-P9). Can save much time if you have many workpiece in one machine, you can choose the programs (P1-P9) to fast working.

6. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.

7. 100% Duty cycle, continuous working is allowed at maximum power output.

8. Simple to install, Installation can be done by unprofessional person very easily

9. Energy Saving Up to 20-30% compare with SCR machine.

10. Diode Rectification Technology Make sure high power factory—0.98.

11. Prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.

Parameters:

Application:

Brazing, Soldering, Welding All kinds of Diamond, Silicon Carbide, Copper, brass fittings, Pipes, Plate and so on.

Advantage of Compare the SCR Parallel induction heating machine:

1. Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type

2. Series Resonance IGBT type machine, will not interference other equipment working, No need special input transformer to working this machine. Will not pollute electricity Net.

3. Easy to Using, no need adjust the main board, no need to adjust capacitor's connection when you want to work other workpiece.

4. After we debug the machine in our company, then you can use it directly. Very convenient.

5. Digital type machine, frequency, power, current can shows in the touch screen, easy to control the machine and see the working efficiency.

6. More stable performance.

7. Water Pressure and water Temperature Meter in the machine.

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.