high frequency induction heating machine for copper surface brazing/ welding/soldering

1. Main Characteristics of LSW-30 IGBT Induction Heating Machine:
These series are suitable for many applications, for example,
(1) Heat treatment of gear and shaft;
(2) metal wire and foil heating;
(3) tiny or powder material melting
Due to the adopting of our third generation inverting control technology, These series machines are characterized not only with high power and high frequency up to 500KHZ output, but also with high reliability .
2. Advantage of Induction Heating Equipment :1. Heating power, retaining power, heating time, retaining time can be preset and adjusted, this makes it possible to control the heating curve and heating time.
2. It is suitable to use in the repeated heating or high speed heating of small parts;
3. When using in brazing, with proper timing parameters, rapid heating and retaining can be achieved to keep the temperature while the brazing material is melted and then to let the brazing material spread smoothly to form good joint.

3. Technical Parameters of LSW-30 IGBT Induction Heating Equipment:

4. Main Features of induction heating equipment:

(1) High efficiency: Metal can be heated to its desired temperature, even its melting point, instantly.
(2) Energy saving: The induction heating machine adopts IGBT from Siemens & LC series circuit design, saving energy up to 15%-30%.
(3) Low cost: The heating time is short, compared to other heating methods, significantly reducing the amount of metal loss.
(4) Easy for installation: Following the user manual, even non-professional persons can install the induction heating machine easily.
(5) Stable operation: complete protection, make customers have nothing to worry about.
(6) No harm to the environment: The induction heating machine uses electricity, producing little waste gas and water.