Medium Frequency 100kg Copper Gold Silver Melting Induction Furnace​

1. Obvious feature of Electric copper Induction Melting Furnace:

Melting Furnace is the best choice for melting some of metals.It'll up to 1200 Degree Centigrade with 15-20 mins.It is widely used in the penetration heating occasions about metallurgy,petroleum,chemical,laboratory,heat-treatment,etc.

• Fast melting, Energy-saving, Low pollution.
• There are over 10 safety protection functions like over-voltage, over-current, lack of water, phase loss, tow water pressure, etc.
• Self-developed constant power control board can monitor variation of voltage and current automatically to ensure max melting efficiency.
• 24 hours constant working will meet your long time melting.
• A full year warranty for all machines.
• Meet any melting capacity of metal. From 0.5 kg gold melting furnace to 60 tons steel melting furnace.

2. Main technical parameters of LSZ series induction melting furnace:

3. Electric Gold Aluminum Metal Induction Melting Furnace Feature:

1.Induction heating melting furnace use crucible high temperature to heat metal.then can melt, refine, casting, etc production.
2.Can melt platinum, rhodium and palladium, gold,silver, copper, steel, aluminium, Activated carbon,gold dust sands, electrolysis mud, gold and silver powder, tin ash tin slag etc.
3.Induction heating melting furnace can melt weight from 0.001KG--500KG per time. melting time from 5-40 minutes. max temperature will be 1500C--2000C.
4.Induction heating melting furnace have fixed type,push out type,auto pouring type,furnace up down moving type

4. Application of copper silver gold induction melting furnace:

1. M.F. melting machines can be used for the melting of steel, stainless steel, brass, aluminium, gold, silver so on.
2. Because of the stirring effect which caused by the magnetic force, the melting pool can be stirred during the melting course to ease the floating of the flux oxides to produce high quality casting parts.
3. Wide frequency range from 1KHZ to 20KHZ, working frequency can be designed by changing the coil compensating capacitor according to the melting material, quantity, stirring effect desire, working noise, melting efficiency other factors.
4. Power efficiency is 20% higher than the SCR medium frequency machines;
5. Small light, a lot of models can be selected to melt different amount of metals. Not only is it suitable for the factory, but also suitable for the college researching companies to use.

Induction Heating Machine	Induction Quenching Machine	Induction Brazing Machine	Large Melting Furnce