round bar high frequency induction heating machine for forging

1. Features of IGBT induction heating equipment: suitable for heating steel bars, pipes, plates and angle steels.

1. Complete equipment protection facilities

The high-frequency heating equipment is equipped with all-round alarm indications such as overheating, water shortage, overvoltage, overcurrent, etc., and is automatically controlled and protected to maximize the safety performance of the equipment;

2. The equipment has a fast heating time and a wide heating range

By adjusting the heating speed, the fastest heating speed is less than 1 second, and the length of heating time can be adjusted according to specific usage requirements;

3. The high-frequency heating equipment is easy to install and easy to operate

Connect the power supply, induction coil and water in and out to use.

4. High heating efficiency and good effect

The heating is very uniform (by adjusting the density of the induction coil, each part of the workpiece can obtain the required temperature to meet the unnecessary requirements), the temperature rises fast, the oxide layer is small, there is no waste after annealing, which saves resources and reduces loss.

5. High-frequency induction heating equipment is small in size and light in weight small in footprint, saving plant area, good working environment, environmental protection, and safety without noise, exhaust gas, dust and other pollution.

6. Eliminate the danger of high voltage and improve safety 　

The step-up converter that generates nearly ten thousand volts is eliminated, and the safety is very high.

2. Technical Parameters of LSW-300 IGBT induction heating equipment:

3. Applications of IGBT induction heating equipment:

1. Heating: mainly for carbon steel, stainless steel, alloy, brass, aluminum etc heating.
2. Forging: whole and partial induction forging for metal bar.
3. Work piece hot forging and rolling: standard parts, fasteners, automobile parts, small hardware, round bar and billet, etc.
4. Specific application for the induction forging heater:
(1) bolts and nuts forging and hot upsetting
(2) pipe induction forging and forming
(3) auto parts (connecting rod, crank shaft, etc.), cast iron beam heating and continuous heating
(4) oxygen bottle forging
(5) rivet heating
(6) long / round / square / angle bar and billet heating, etc.

The basic composition of high-frequency heating equipment includes induction coil, AC power supply and workpiece. According to different heating objects, the induction coil can be made into different shapes. The coil is connected to the power supply, and the power supply provides alternating current for the coil. The alternating current passing through the coil generates an alternating magnetic field passing through the workpiece, and the magnetic field causes the workpiece to generate eddy currents to heat it.