Yokohama S160 2R S-160-2R Double Convoluted Punch Air Spring With Plate

Cross Reference

Yokohama S-160-2R

Yokohama S 160 2R

Yokohama S1602R

Yokohama S160-2R

Yokohama S160 2R

Yokohama S-160 2R

Yokohama S-1602R

Yokohama S-160-2

Yokohama S 160 2

Yokohama S1602

Yokohama S160-2

Yokohama S160 2

Technical data

Design height(mm): 98mm

Max. height(mm): 148mm

Min height(mm): 53mm

Common max. travel(mm): ±35mm

Compression mac. outside diameter(mm): 220mm

Effective area(cm2): 200

Volume(L): 2.1mm

Load(KN): 9.8

Dynamic spring constanct(n/mm): 255mm

Natural vibration frequence(HZ): 2.5

Max. internal pressure(MPa) 0.88

Internal pressure failure( Mpa): 2.9-3.9

Top plate mounting threads qty: 4pcs

Bottom plate mounting thread qty: 4pcs

Girdle hoop: 1 piece

Other type we could offer

Application

Stamping production is mainly for plates. Through the mold, blanking, punching, forming, deep drawing, trimming, fine blanking, shaping, riveting and extrusion parts can be made, which are widely used in various fields. . For example, the car body, chassis, fuel tank, radiator fins, steam drum of the boiler, shell of the container, iron core silicon steel sheet of the motor and electrical appliances, etc. are all stamped. Instruments, household appliances, bicycles, office machinery, living utensils, etc.
The stamping process can be divided into four basic processes:
Punching: The stamping process that separates the sheet metal (including punching, blanking, trimming, sectioning, etc.).
Bending: The stamping process of bending the sheet into a certain angle and shape along the bending line.
Deep drawing: the stamping process of turning flat sheet metal into various open hollow parts, or further changing the shape and size of hollow parts.
Local forming: a stamping process (including flanging, bulging, leveling and shaping processes, etc.) that uses various local deformations to change the shape of the blank or stamping.

The use of air springs in the punching equipment can reduce the surrounding noise and vibration, and improve the service life of the punching equipment.

The related picture