Double Rubber Convoluted Air Spring 2B5216 Replace For W01-M58-5216

OEM NO.

Specifications and Detailed Technical Parameters:AIRSUSTECH 2B5216

• Nut/blind nut

Top plate screw (nut) teeth:2XM10×1.5

The screw center distance of the top cover plate: 70mm

Screw (nut) teeth of the bottom cover plate:2XM10×1.5

The screw center distance of the bottom cover plate: 70 mm

• Air hole/air inlet/air fittings

Air hole/air inlet: G1/2

The screw center distance between the air hole and the nut: 35mm

• Cover plate

Top plate diameter: 132 mm

Diameter of the bottom cover: 132mm

• Bell rubber bellows

Rubber bellows diameter: 203mm

The Maximum Height: 230mm

The Minimum Height: 75 mm

• Bumper block/bumper block

No bumper block

• Belt loop/Belt loop

With belt loop: One belt loop

The related picture of 2B5216

The solution of automobile air suspension airbag failure.

1. The air bag has no gas: This situation is relatively simple to check. Let's first understand the air path structure of the air suspension. So this reason may be the air suspension special air storage cylinder no gas or pressure is very low; Air pipeline blockage or discount; Horizontal height valve connection rod off. When we check, we can check one by one, find out the principle and deal with the problem

2. Airbag wrinkling: This fault may be caused by the fact that when the vehicle is transferred and lifted, the airbag is stretched out more and not reset normally, resulting in airbag wrinkling.
The specific solution is to disassemble the rubber connector below the vertical rod of the horizontal height valve and the connection between the axle, lift the rod up, and then install the rod back after all the air bags are fully inflated, and the air bag can return to normal state.

Four reasons to choose us

First, the product specifications are complete: our own brands up to more than 500, and we have agents to distribute Goodyear air springs, large inventory. We can also customize production according to your requirements.

Second, we have strong productive forces. We have standard production workshop 'formal testing equipment and professional R & D team.

Third, the product quality is good, well-known. Our raw materials are imported with original packaging, and our products sell well at home and abroad.

Fourth, good after-sales service. Our products have a one-year warranty period, during which we will replace them if there is any quality problem

FAQ:

1. Where is your company? Which products do you mainly sell?

A: We are located in Guangzhou. We are focused on air spring, including industrial equipment, bus, truck, car springs and air pumps. We retrofitted the air suspension system.

2. How is the shipping fee?

A:The freight is determined according: the customer's detsination country, the product required, the quantity of the product, and the logistic method.

3. How long is the warranty?

A: 12 months.