Phoenix SP1B04/SP 1B 04/SP 1 B 04 Replacement Rubber Single Convoluted G1/8 Air Inlet Air Spring

Refer Number

Contitech: FS 40-6 1/8 M8

Contitech: FS40-6 1/8 M8

Contitech: FS 40 6 1/8 M8

Contitech: FS40 6 1/8 M8

Phoenix: SP 1 B 04

Phoenix: SP1B 04

Phoenix: SP1B04

Weforma: WBE 100-E1

Weforma: WBE 100 E1

Weforma: WBE 100E1

Weforma : WBE100-E1

The detailed Specifications and techical parameters

The Max. Diameter: 145mm

Air hole/air inlet: G1/8

Working stroke: maximum 110 mm to minimum 50 mm

Top plate screw (nut) teeth: M8×1.25

Bottom plate screw (nut) teeth: 2 x M8×1.25

Top cover diameter: 90 mm

Bottom cover diameter: 90 mm

Screw center distance: 20 mm

The air hole distance between the nuts: together

Min. pressure: 0 bar

Return force to min.height: ≤120N

Overall weight with clamped plates: 0.9kg

Vibration isolation - dynamic characteristic values

Design Height H: recommended 90mm, minimum 70mm

Pneumatic application-static characteristic values

Force F[KN]

The reated picture

Guomat Air Springs Production Line

Air spring is an industrial accessory that can function as support, buffer, braking, height adjustment and angle adjustment. The air spring can keep the natural vibration frequency unchanged under any load, can bear radial and axial loads at the same time, and can also transmit a certain torque, and different bearing capacities can be obtained by adjusting the internal pressure.

1. Rubber mixing: exercise and rubber processing
2. The production of rubber bellows: bellows is made of inner is a layer of rubber, the middle is two layers of cord fabric and the outside is a layer of rubber. Through the fixed mold them together.

3. Other forming accessories: plastic parts, iron base, aluminum base, iron plate, and other hardware accessories, these parts have been made in different moulds.

4. The bellows and other accessories are gotten together by machine and make out air spring.

5. Air tightness detection: each production of good air spring fills the air, and then put into the water to test whether the bubbling gas leakage.

6. Quality: blasting test, fatigue test, the air spring blasting pressure GUOMAT factory is up to 30 atmospheric

pressure, fatigue to reach 3 million times, meet the international standards.

7. Packing: the qualified products for packaging, are usually carton packaging, need some special strong wooden case packing, others are labeling packaging according to customer's requirements.