Iron Double Convoluted Air Spring Actuator Airkraft 113053/2B-181 Replacement With G3/4 Rubber Bellows For Vibration

Refer No.

Contitech FD120-17

Contitech FD12017

Contitech FD120 17

Contitech FD 120-17

Contitech FD 120 17

Contitech FD 12017

Specifications and Detailed Technical Parameters: 2B12017-34

• Nut/blind nut

Top plate screw (nut) teeth: 2×M8×1.25

The screw center distance on the top plate: 70mm

Screw (nut) teeth of the bottom cover plate: 2×M8×1.25

The screw center distance on the bottom plate: 70mm

• Air hole/air inlet/air fittings

Air hole/air inlet/air fittings: G3/4

Air hole location: middle

• Cover plate

The Diameter Of The Top Plate: 135 mm

The Diameter Of The Bottom Cover: 135mm

• Bell rubber bellows

MAX. Rubber Bellow Diameter: 215mm

Height: 167mm

Working stroke: 75-230mm

• Bumper block/bumper block

Without bumper block

• Belt loop/Belt loop/Girdle hoop

With one piece of belt loop/girdle hoop

Min. pressure: 0 bar

Return force to min.height: ≤200N

Overall weight with clamped plates: 2.3kg

Vibration isolation - dynamic characteristic values

Design Height H: recommended 190mm, minimum 175mm

Pneumatic application-static characteristic values

Force F[KN]

Other Types Airkraft Replacement We Could Offer

Reasons for the application of rubber air springs in vibration equipment

1. Reduce the operating frequency. The greater the stiffness of the rubber air spring material, the greater the stiffness of the air spring, and the higher the first-order resonance frequency, which increases the minimum operating frequency of the system. Therefore, the rubber safety air spring vibration isolation system should reduce the material stiffness and natural frequency, so that the bearing capacity of the air spring vibration isolator can be retained enough, and the minimum operating frequency of the system should be as low as possible. ​

2. The comprehensive isolation effect is strong. When the vibrating table vibrates laterally, the rigidity of the rubber material of the reed capsule is much larger, the rubber air spring body has a soft structure, and has a comprehensive vibration isolation effect of axial, lateral and rotational steering, and a throttling is set between the air spring and the additional air chamber. valve hole. When air flows through the throttle hole, part of the vibration energy is absorbed due to resistance, which acts as damping and damping.

The related picture of 2B12017-34