W01-358-7325 Firestone Air Bags 26 Bellow No.: 2B 20-1 For Construction Equipmen

AIRSUSTECH 2B7325 refer to W01-358-7325 Firestone Air Bags product description:

The air spring shock absorber AIRSUSTECH 2B7325 refer to W01-358-7325 Firestone Air Bags can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded

• In order to press the air spring shock absorber AIRSUSTECH 2B7325 refer to W01-358-7325 Firestone Air Bags to the minimum height, a restoring force is required. Usually, this is achieved by applying a load

• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 2B7325 refer to W01-358-7325 Firestone Air Bags must be used to absorb the force

• Before disassembling the air spring shock absorber AIRSUSTECH 2B7325 refer to W01-358-7325 Firestone Air Bags , the internal air must be released to prevent accidents and personal injury.

• During operation, the rubber air spring shock absorber AIRSUSTECH 2B7325 refer to W01-358-7325 Firestone Air Bags shall not be in contact with other parts

AIRSUSTECH 2B7325 Cross OEM Original Equipment Manufacturer:

AIRSUSTECH 2B7325

AIRSUSTECH rubber bellows 2B20-1

Firestone: 7325
Firestone:W01-358-7325
Firestone:W01 358 7325
Firestone:W013587325
ContiTech:FD 120-20 509 1/4 M8
ContiTech:FD 120 20 509 1/4 M8
ContiTech:FD 120 20 509 1/4 M8
Goodyear Bellows NO.:578-92-3-530
Goodyear Bellows NO.:578 92 3 530
Goodyear Bellows NO.:578923530

Goodyear:2B8-150
Goodyear:2B8-153
Goodyear:2B8-550

Goodyear:2B8 150
Goodyear:2B8 153
Goodyear:2B8 550

Goodyear:2B8150
Goodyear:2B8153
Goodyear:2B8550

American Airlines Number: 8003-006
Hendrickson Trailer ID: S-14395
Mark Number: 227QS-32
Triangle part number: 4509
Triangle bellows number: 6392
Watson & Charin ID: AS-0030
Sauer Code: P10-754

AIRSUSTECH 2B7325 Specifications and Detail Technical Parameters

❶Nut/blind nut

Top plate screw (nut) teeth: 2XM8X1.5
The screw center distance of the top cover plate: 70 mm
Screw (nut) teeth of the bottom cover plate: 2XM8X1.5
The screw center distance of the bottom cover plate: 70 mm

❷Air hole/air inlet/air fittings
Air hole/air inlet: G1 / 4
Screw center distance between air hole and nut: 35 mm

❸Cover plate
Top plate diameter: 141 mm
Diameter of the bottom cover: 141 mm

Bell rubber bellows
Maximum diameter of rubber bellows: 225 mm
Natural diameter of rubber bellows:195 mm
Working stroke: minimum 75 mm to maximum 260 mm
Maximum height: 274 mm
Minimum height: 95mm
Stroke height: 179mm

❺Bumper block/bumper block
No bumper block

❻Belt loop/Belt loop
There is a belt hoop: a belt hoop