OLED Display 24VDC Clamp On Water Flow Meter
I INTRODUCTION
ML-F8 is very unique in its structural design. It uses a circular magnetic steel to achieve automatic connection during installation.It takes only 2-3 minutes to complete the whole process from installation to measurement. It also adopts the current popular OLED display, which makes it easy to read in low light conditions.
ML-F8 is widely used in the production process for flow measurement and monitoring. The application of the product continuously and effectively controls the flow of the fluid, so as to improve the yield of the product and even save the input of the personnel, bringing benefits to the production enterprise.
II. SPECIFICATION
Model: ML-F8
Velocity Range: 0.1 m/s ~ 5.0 m/s
Accuracy: ± 2.0%
Repeatability: 0.80%
Pipe Size: DN15,DN20,DN25,DN32,DN40,DN50
Data Storage: Daily, Monthly, Yearly Totalizer
Analog output: 4~20mA, Maximum load: 600Ω
Alarm output: OCT, Upper and lower limit alarm function (for option)
Communication: RS485,support Modbus communication protocol
Power Supply: 24VDC
Cable Length: 1.8m
Keypad: Four light touch buttons
Screen: OLED 128*64 screen display
Units: Metric and imperial units are available
Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA Gallons(GAL)/min
Default unit setting: m3/h
Totalizer: Six bit digit
Piper Material: Stainless steel pipe, carbon steel pipe, PVC
Case Material: Aluminum alloy
Environment Temp.:0℃-50℃
Medium Temp.:0℃-50℃
Environment Humidity: 0-95% relative humidity, without condensation
IP Grade: IP54
III. PIPE SPECIFICATION
Size | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 |
Nominal Pipe Diameter Size | 15mm | 20mm | 25mm | 32mm | 40mm | 50mm |
Pipe OD | 20mm | 25mm | 32mm | 40mm | 50mm | 63mm |
Pipe ID | 15mm | 19mm | 26mm | 33mm | 43mm | 55mm |
Inch | 1/2’’ | 3/4’’ | 1’’ | 1.2’’ | 1.5’’ | 2’’ |
IV. INSTALLATION STEPS