IP54 25mm Pipe Clamp On Ultrasonic Flow Meter 20mA
I INTRODUCTION
ML-F8 is very unique in its structural design. It uses a circular magnetic steel to achieve automatic connection during installation.It takes only 2-3 minutes to complete the whole process from installation to measurement. It also adopts the current popular OLED display, which makes it easy to read in low light conditions.
II. SPECIFICATION
Model | ML-F8 |
Velocity Range | 0.1 m/s ~ 5.0 m/s |
Accuracy | ± 2.0% |
Repeatability | 0.80% |
Pipe Size | DN15,DN20,DN25,DN32,DN40,DN50 |
Data Storage | Daily, Monthly, Yearly Totalizer |
Analog output | 4~20mA, Maximum load: 600Ω |
Alarm output | OCT, Upper and lower limit alarm function (for option) |
Communication | RS485,support Modbus communication protocol |
Power Supply | 24VDC |
Cable Length | 1.8m |
Keypad | Four light touch buttons |
Screen | OLED 128*64 screen display |
Units | Metric and imperial units are available Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA Gallons(GAL)/min Default unit setting: m3/h |
Totalizer | Six bit digit |
Piper Material | Stainless steel pipe, carbon steel pipe, PVC |
Case Material | Aluminum alloy |
Environment Temp. | 0℃-50℃ |
Medium Temp. | 0℃-50℃ |
Environment Humidity | 0-95% relative humidity, without condensation |
IP Grade | IP54 |
III. PIPE SPECIFICATION
Size | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 |
Nominal Pipe Diameter Size | 15mm | 20mm | 25mm | 32mm | 40mm | 50mm |
Pipe OD | 20mm | 25mm | 32mm | 40mm | 50mm | 63mm |
Pipe ID | 15mm | 19mm | 26mm | 33mm | 43mm | 55mm |
Inch | 1/2’’ | 3/4’’ | 1’’ | 1.2’’ | 1.5’’ | 2’’ |
IV. COMPONENT PARTS