This is our new product, welcome to contact us!!
Measuring range | ±50G |
Deviation calibration | <5mg |
48h deviation stability | <2mg(Typical value) |
Measuring axis | X,Y,Z |
Annual deviation stability | 7.5Mg Typical value(<25) |
Power on/off repeatability | <10mg(MAX) |
Deviation temp. coefficient | 0.5mg/℃ Typical value ±2mg/℃ MAX |
Annual scale factor stability | 300(<1000)ppm Typical value |
Resolution/threshold(@1Hz) | <5mg(MAX) |
Nonlinear | <0.5%FS(MAX) <0.09g(MAX) |
Bandwidth(4) | 1~≥400Hz |
Resonance frequency | 6.7kHz |
Output resistance/load | Min 10KΩ,as Vout(Pin 32)&VAGND(Pin 38)max 50pF, as Vout(Pin 32);& max 100F ,as VAGND(Pin 38) |
Shock(g) | 20g rms,20~2000Hz (Random noise, o, p, I each shaft effect 30min) |
Operating current consumption | <3mA@12V DC |
Scale factor temp. coefficient | 100ppm/℃(Typical value) -50/250(Min/Max value) |
Impact resistant | 100g@11ms,Times/Axis(half sinusoid) |
Recovery time | <1ms(1000g,1/2 sin 1ms,impact in/shaft) |
Output current consumption | 4~20mA@12V DC input voltage (%FS) |
Operating temperature | -40℃~+85℃ |
Output rate | 5Hz, 15Hz, 35Hz, 50Hz, 100Hz can be set |
Output signal | TTL |
Output voltage range | 0~5V DC@12V DC |
Input(VDD-CSS) | 9-36V DC |
Theory | Inductance Sensor |