Pressure Transmitter
Features
Reliable performance, good long term stability
easy application
Short protection and strong reverse polarity protection
Current and low cost
Compact size with light weight
Introduction
SPT21C1 is economical pressure transmitter, uses standard ceramic pressure sensor and special circuit board to make it cost effective. This product is easy to be installed,also OEM service offered.
Specification
Pressure range | 0~0.5…40MPa (0~5…400bar) |
Over pressure | 2 times FS |
Pressure type | Gauge |
Process connection | G1/4 male thread (or as per customer’s requirement) |
Accuracy | ±0.5%FS |
Long term stability | max. ±0.3%FS/year |
Offset thermal drift | ±0.02%FS/℃ |
Application temp. | -30~80℃ |
Storage temp. | -40~125℃ |
Power supply | 12~28VDC |
Output signal | 4~20mADC(2 wires) 0/1~5VDC(3 wires) |
Load resistance | ≤(U-12)/0.02Ω(2-wire), ≥10k(3-wire) |
Housing protection | IP65 |
Electrical connection | Hirschmann connector,M12 (or as per customer’s requirement) |
Construction and Outline Dimension
Construction material:
Housing | SS |
Pressure port | SS |
Sensor | Ceramic |
Sealing gasket | Viton |
Plug housing | Plastic |
Cable | Polyethylene |
Outline dimension: