The YT-1000R is advanced electro-pneumatic valve controllers for single or double acting rotary or linear actuators.
No additional parts are necessary to change between single or double acting actuators and direct or reverse acting.
Features
model | YT -1000 | ||
Cover shell material | aluminium | ||
Trip distinction | Straight trip | ||
Forms of action | Single-action / dual-action vs | ||
incoming signal | 4~20mA DC | ||
input pressure | 0.14 ~ 0.7 MPa (1.4 ~ 7 bar) | ||
route or distance of travel | 10 ~ 150 mm | ||
impedance | Max.250 ± 15Ω | ||
Gas source interface | Rc 1/4 or G 1/4 or 1/4 NPT | ||
pressure gauge connection |
Rc 1/8 or 1/8 NPT | ||
Power interface | G 1/2 or 1/2 NPT or M20x1.5P | ||
levels of protection | IP66, Ty pe 4X | ||
anti-hazard classification |
N . Not explosion-proof | ||
M .Ex db mb IIB T 5 Gb (ATEX , IECEx , TS) Ex dmb IIC T5 (KCs) Ex db mb IIB T5 Gb (INMET R O ) A .Ex d m IIB T5 (FM, CSA) C .Ex dmb IIB T 5/T 4 (KCs) H.Ex d mb IIC T 6 Gb (NEPSI ) X .Ex dmb IIB T 5 (TIIS ) E .Ex d mb IIB T5 Gb X (TRCU) i.Ex ia IIB T6 Gb (KC s ) P .Ex ia IIC T6 Ga (NEPSI) Z .Ex d mb IIB T5 Gb (CCC) B.Ex d mb IIC T6 Gb(CCC) G.Ex ia IIC T 6 Ga (CCC ) |
|||
ambient temperature |
Work to warm up |
normalized form | -20°C ~ 70°C (-4°F ~ 158°F) |
high temperature modification | -20°C ~ 120°C (-4°F ~ 248°F ) | ||
Low form | -20°C ~ 120°C (-4°F ~ 248°F) | ||
Explosion-proof ambient temperature | Refer to “Manual 2.6 certifications” for details | ||
linearity | Single-action | ± 1% F .S . | |
Double- -acting | ± 2% F .S . | ||
lag degree | ± 1% F .S | ||
sensitivity | single- action | ± 0.2% F .S . | |
double -acting | ± 0. 5% F .S . | ||
repetitiveness | ± 0. 5% F .S . | ||
rate of flow | 80 LPM (Sup. =0.14 MPa) | ||
gas consumption | 2.5 LPM (Sup . =0.14 MPa @ idle) | ||
Feedback signal (option) |
4~20mA (DC 9~28V) | ||
weight | 2.7 Kg (6.1 lb) | ||
coating material | Epoxy polyester powder coating |