360bar Gasoline Industrial High Pressure Water Cleaner High Pressure Cleaning Machine

Details:

1.Power end crankshaft housing is made by the cast iron.it is stronger than the aluminium alloy.
2.Cross head is made by the Babbitt hard alloy.it has a long working life for industrial design.
3.Hydraulic end pump head is made by the hard alloy 40Cr.it can work continuously for cleaning jobs.
4.All hydraulic end is desgined for easy uninstall,so it is easy to fix when the parts broken.
5.For some outdoor use purpose,we can make it driven by the diesel engine or the gasoline engine.
6.You can choose the dive way from diesel engine,gasoline engine,electric motor.
Electric motor can be 3 phase voltage from 380v to 480v,50-60hz.

360bar Gasoline Industrial High Pressure Water Cleaner High Pressure Cleaning Machine

Characteristics as below:

Products Description:

high pressure water pump is used to direct high pressure water streams against material to clean or cut it. The streams of water released by water jetting and water blasting equipment is normally 5,000 PSI to 40,000 PSI. In an efficient water jetting system, pressure is vital consideration. Typically, hardened deposits respond better with high pressure water pumps, and softer materials are best removed with lower flows.

High pressure cleaner is a kind of machine which has a triplex plunger pump, driven by the engine or motor.
then the pump produce a high pressure water jet.Connecting with a high pressure spray gun,a hose .

When operating condiations are really tough and extreme,our high pressure cleaner is the best solution,whether
the application is offshore or onshore.Apart from being an evvironmental friendly blasting method,the high pressure cleaner is an excellent cleaning results.

Moreover,The high pressure cleaner procide a surface cleaning to coating,resulting to longer lasting coating.It is commonly accepted that surfaces that have been water blasted with super high pressure jets have a significantly lower level of residual chlorides which sllows better coating adhesion and longer life.

Water jetting and water blasting equipment is used for cleaning or demolition of products made of metal, wood, concrete, stone, plastic, glass or other building materials.

Specific components within a water jetting system include abrasive injectors, pressure generators, blast cabinets or booths, water guns, and water tanks. Abrasive injectors can convert a water jetting system into an abrasive blaster. The injection or metering system controls the amount of abrasive pushed into the air stream. In large systems, the delivery system and injection system may be separate components. Pressure generators increase the pressure of the carrier fluid (water or air). Plunger-type intensifier pumps are commonly used to generate high pressure water for water jet cutting, wet or water abrasive blasting and non-abrasive pressure washing or rinsing.

Applications:

1.using in Meat packing Cleaning of grease, fats, blood on conveyors, pipes and drains. With pressure 200bar – 690bar

2.using in Metal processing Mill scale, rust and weld slag from new vessels, tanks and pipe. With pressure 1400bar – 2800bar

3. using in Military Cut & explode mines, decontamination of shells and cutting cordite. Cleaning of machinery & vehicles with the pressure 200bar – 2800bar

4.using in Mining Pre-maintenance cleaning of dump trucks, drag-lines, underground haulage lines and shafts.Unclog plant machinery due to coal, rock dust and oil. With the pressure 300bar – 2800bar

5.using in Municipalities Sewers, drains, pipe lines, sanitation, refuse vechicles and reservoirs. With pressure 200bar – 500bar

it is widely used in ship cleaning,oil removing,fuel pipeline cleaning in refinery fields.




Customer gave some comments on our products:


FAQ

360bar Gasoline Industrial High Pressure Water Cleaner High Pressure Cleaning Machine

Q1. What about the lead time?
A: 8-10 working days for mass production.

Q2. Do you have any MOQ limit for the order?
A: Low MOQ, 1pc.

Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by sea shipping.

Q4. How to proceed an order for the product?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly:we sign a contract
Fourthly We arrange the production.

Q5. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.

Q6: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.