24-way switch industrial wireless remote control DH-Z24F, with button text identification: Up, Down, East, West, South, North, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, start, emergency stop, power indicator light, signal indicator light;

Main function: Control the operation of 24 actions of the equipment, including up, down, east, west, north, south, etc., in normal jog mode, with up and down interlocking, east-west interlocking, north-south interlocking, 1 and 2 interlocking, 3 and 4 interlocking, 5 and 6 interlocking, 7 and 8 interlocking, 9 and 10 interlocking, 11 and 12 interlocking, 13 and 14 interlocking, 15 and 16 interlocking, 17 and 18 interlocking. It can also be designed as a self-locking hold mode as needed, without setting interlocking logic or full interlocking mode.

Product highlight: Good anti-interference performance, with unique identification codes between each remote control transmitter and receiver, reaching hundreds of millions of sets, never repeating, and strictly avoiding mutual interference and potential interference. And the remote control has up to 50-256 frequency points, and each set in the same environment can be configured with separate frequency points. Even if the frequency points overlap, given the uniqueness of the ID identification code, there will be no impact on each other, ensuring safety and reliability.

Usage: Equipment within the 24 point switch range, such as bridge erecting machines, beam lifting machines, port cranes, tower cranes, traveling cranes, overhead cranes, conventional cranes, three hoist overhead cranes, three small vehicle overhead cranes, gantry cranes, gantry cranes, etc., as well as chain hoists, special vehicles, tunnel trolleys, hydraulic machinery, excavation machine pump stations, mobile crushers, special vehicles, rolling machines, multi motor equipment, shear machines, engineering machinery Engineering vehicles, mining machinery, etc.

Technical parameters: remote control distance of 100 meters, 250 meters, working temperature of -35 ° -+75 °, transmitter power supply of 3 No. 5 dry batteries of 4.5V, receiver terminal conventional working voltage of 12-24V AC/DC, other voltages of AC220V or AC380V, etc., can be adapted through external transformer voltage conversion.

Model and configuration instructions: This machine model DH-Z24F comes standard with 1 transmitter and 1 receiver. The transmitter antenna is built-in, and the receiver is equipped with an external extended suction cup antenna (1 meter long feeder), which is attached to the outside of the distribution box and installed inside the receiver.