MR-J2S-200B Mitsubishi 3 PHASE Industrial Servo Drives 2000W NEW
Mitsubishi MR-J2S-200B servo amplifiers are dependable industrial components. It uses a 3-phase 200-230 VAC power source at 50/60 Hz and can handle voltage swings between 170 and 253 VAC. The amplifier's 5% frequency fluctuation ensures reliable performance in different settings. This amplifier controls servo motors using sinusoidal PWM and current regulation. The built-in dynamic brake improves motor safety and control. The MR-J2S-200B servo amplifier controls industrial motors efficiently with a speed frequency response of 550 Hz or greater.
Technical specifications for MR-J2S-200B
Manufacturer | Mitsubishi |
Product ID | mr-j2s-200b |
Product Type | Servo Amplifier |
Power Supply (Voltage/frequency) | 3-phase 200-230VAC, 50/60Hz |
Power Supply (Permissible voltage fluctuation) | 3-phase 170-253VAC |
Power Supply (Permissible frequency fluctuation) | ±5% |
Control System | Sinusoidal PWM control/current control system |
Dynamic brake | Built-in |
Speed frequency response | 550 Hz or more |
Structure | Fan-cooling, open (IP00) |
Ambient temperature | Operation:0-55°C (no freezing), Storage: -20-65°C (no freezing) |
Ambient humidity | Operation:90% RH max. (no condensation), Storage:90% RH max. (no condensation) |
Atmosphere | Inside control panel; no corrossive gas, no flammable gas, no oil mist, no dust |
Elevation | 1000m or less above sea level |
Oscillation | 5.9 m/s max |
Melservo MR-J Servo Drives and Motors with Amplifier Controllers.
(1) Servo amplifiers and servo motors used Use the servo amplifiers and servo motors which comply with the standard model.
Servo amplifier :MR-J2S-10B to MR-J2S-22KB MR-J2S-10B1 to MR-J2S-40B1
Servo motor :HC-KFS HC-MFS HC-SFS HC-RFS HC-UFS HA-LFS HC-LFS
(2) Installation Install a cooling fan of 100CFM (2.8m3/min) air flow 4 in (10.16 cm) above the servo amplifier or provide cooling of at least
equivalent capability.
(3) Short circuit rating This servo amplifier conforms to the circuit whose peak current is limited to 5000A or less. Having been subjected to the
short-circuit tests of the UL in the alternating-current circuit, the servo amplifier conforms to the above circuit.
(4) Capacitor discharge time The capacitor discharge time is as listed below. To ensure safety, do not touch the charging section for 10 minutes
after power-off.
Showing of parts.
MR-J | Description | Condition |
MR-J2S-350B | Mitsubishi MR-J MOTOR (MITMRJ2S350B) | NEW |
MR-J-350A-S12 | MR-J Servo Amplifier (MRJ350AS12) | NEW |
MR-J2-100A | MR-J SERVO AMPLIFIER 1KW 3 PHASE 50-60HZ 200-230V (MRJ2100A) | NEW |
MR-J2-03A5 | MR-J Servo Amplifier 10W 24VDC INPUT (MRJ203A5) | NEW |
MR-J2-100A-S01 | SERVO DRIVE AMPLIFIER 1KW 200-230V 50-60HZ 3 PHASE (MRJ2100AS01) | NEW |
MR-J2-100B | MR-J SERVO DRIVE 1KW 200V (MRJ2100B) | NEW |
MR-J2-100C | MR-J Servo Amplifier 1KW 200V (MRJ2100C) | NEW |
MR-J2-100C-S100 | Mitsubishi SERVO CONTROLLER 1KW 200V (MRJ2100CS100) | NEW |
MR-J2-100CT | Mitsubishi MR-J BOARD (MRJ2100CT) | NEW |
MR-J2-10A | Mitsubishi MR-J SERVO CONTROLLER 100W 200V (MRJ210A) | NEW |
MR-J2-10A1 | SERVO DRIVE 0.1KW 3 AMP 100-120VAC 1 PHASE (MRJ210A1) | NEW |
MR-J2-10B | MR-J Servo Amplifier 100W 200V SSC NETWORK (MRJ210B) | NEW |
MR-J2-10C | SERVO CONTROLLER 3 PHASE 100W 0.9 AMP 200-230VAC (MRJ210C) | NEW |
MR-J2-40A-A28 | Servo Amplifier 400W 230V 50/60HZ (MRJ240AA28) | NEW |
MORE INFORMATION
DELIVERY
Logistic partners UPS, FedEx and DHL
International delivery available
Same day dispatch from group stock
WARRANTY
All parts new are covered by Shenzhen Viyork 12 month warranty
RETURNS
No hassle returns policy
Dedicated customer support team
PAYMENT
Trade credit
We understand that credit is a necessary part of business and offer credit agreements on request, subject to status.
Payment options
We accept Bank transfers and the following methods of payment:
Western Union PayPal VISA
Pls contact us:
Company: Shenzhen Viyork Technology CO.,LTD.
Cotact:Sophey Guo
Moblie/WhatsApp: 0086-13798305309
Email: shenzhenviyork@163.com
Skype:szviyork@163.com