1200KW Horizontal Organic Heat Carrier Thermal Oil Boiler For Melt-Blown Nonwoven And Maskproduction Line

This thermal oil boiler takes heat carries oil as medium and uses the hot oil circulating pump force the medium to make liquid circluation ,then the thermal energy will be transmitted to the devices and back to furnace to be reheated. so the boiler can get higher working temperature at low pressure ,and make a better usage of heat , it is a kind of safe boiler with high efficiency and low power consumption this series boiler have advinced program control system, equiped with liquid level controller,pressure controller ,temperature controller ,and alarms to make sure the boiler work orderly and safe.so it is a kind of safe boiler with high efficiency and low power consumption

Heat Transfer Fluid heaters (hot oil heater) to oil (gas) as fuel to oil as medium, using hot oil circulation pumps mandatory medium for liquid circulation, the energy delivery device and then return to Heat re-heating furnace with low pressure in the working temperature was high, and can run on medium high-precision control. System with high thermal efficiency, due to the overall module installation, operation and easy maintenance, is a safe, efficient, energy saving ideal choice for heating equipment.

Fuel oil (gas) from the burner flame after ignition temperature generated within the coil to form into the radiation heating surface, through the internal coil rotated by 180 into the rear forward, the foreign control of the mezzanine area convection heating surface. Then enter the upper mezzanine, the outer coil of the second mezzanine area, in the second mezzanine area to the rear of the chimney into the atmosphere.

Technique data:

Rated thermal power is 0.12Mw (10×104kcal/h) to 14Mw (1200×104kcal/h).

Design pressure is equal to or greater than 1 Mpa.

Operating temperature is equal to or less than 350°C.

Thermal efficiency is between 60% and 85% according to the difference of boiler type.

Technical Parameters:

oil fired thermic fluid heater hot oil boilerThe Gas/Oil Fired thermal oil boiler auxiliaries :

Free-Installation

The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.

Boiler Features

1. Good sealing, large and flexible space, improving the service life of the burner.

2. The boiler adopts a three-layer close coil pipe structure, with three-pass flue gas and higher heat conversion efficiency.

3. The boiler has a compact structure, small floor area, good raw materials, stable, safe and reliable boiler.

4. Multiple interlocking protection systems make the boiler run more safely.

5. High-temperature control accuracy and good combustion effect. The air preheater can effectively improve the thermal efficiency of the boiler to more than 95%.

6. PLC automatic control function can save human resources and extend the service life of the equipment, The material selection is superior. Ten qualified manufacturers are selected from all over the world, and then four higher quality products are selected from ten. After each batch of physical and chemical tests, the production can be carried out to ensure that the material completely meets the standard and is superior to the product.

7.According to the actual situation of the user's location, the flexible design enables the user to save the operation cost and run more safely and stably, but the user has no worries. And According to the use of users, our professional user designers will choose the most suitable products for users.

Boiler Application

industrial thermal oil heater for non-woven hot rolling mill heating

It can be applied in the following areas: high-temperature shaping, plate heating, rubber, drying, dyeing and printing, chemical industry, plywood production, rolled water-proof material production, asphalt heating, non-woven hot-rolled machine, fiber, glass hot press machine, reactor, mould, drying room, oven, and other heating industries.