Hotline Explosion-proof Telephone,ATEX Telephones with EX Horn & EX Beacon


APPLICATIONS
1. Suitable for explosive gas atmospheres Zone 1, 2, 22.
2. Suitable for temperature class T1 ~ T6.
3. Widely used in oil exploration, chemical, military, pharmaceutical, oil refining and other hazardous environments and depots, offshore oil platform, oil tankers and other related industrial application, etc.

This product has the following explosion protection:
II 2G Rx e ib [ib] mb IIC T6 Gb
III 2D Ex ib [ib] tb IIIC T135 °
-40 °C ≤ Ta ≤ +60 °C/+40°C
Zone 1, 2, 22

DESCRIPTION:
This Explosion-proof Industrial Telephone is fully contained within a corrosion resistant cast aluminium weatherproof case which providing complete protection against dust and moisture ingress, resulting in a highly reliable product with a long MTBF.

This VoIP Explosion-proof Industrial Telephone is designed for voice communication in the hostile environment where reliability, efficiency and safety are of prime importance. The telephone can handle the large temperature differences found outdoors, high humidity, exposure to sea water and dust, Corrosive atmosphere, Explosive gases & particles, as well as mechanical wear and tear, making it perfect for use as an emergency telephone.

• AC220V/50Hz reated voltage
• IP54-IP65 protection class
• T1~T4 temperature environment
• Zone 1 & Zone 2
• WF1 Corrosion-proof grade
• G3/4" Inlet Thread
• 10mm~14mm Cable outer dia
• 150/min Guide number
• ≥80dB Sound intensity

• Aluminum casting body
• Fire-proof spool material is stainless steel preparation of net
• Output power 25W (load 8Ω,110V audio signal)
• Input voltage: 110 V,Impedance: 8/16
• Output frequency range: 300 ~ 6000Hz
• Intensity of output sound pressure is 110 dBA @ 1 metre typical

MAIN FEATURES
- Corrosion resistant aluminum alloy die casting housing, available in four colors, with NPT conduit entries and Type 3 / IP67 environmental ratings
- Certificated for use in Hazardous areas of Gas Group IIB/IIA
- Zone classification: Zone 1, Zone 2 and Zone 22
- Ex ’d’ protected
- Intrinsically safe Ex”ib” certified
- Temperature classification:T6
- SIP or H323 protocols (Compatible with all PBX’S)
- Power supply: Power over Ethernet (PoE)
- Fully configurable through any internet browser or the on-board display
- Handset with Noise canceling microphone,for effective communication from noisy areas
(Armored SS cord stands up to rough treatment,optional for black curly cord )
- Completely programmable weatherproof keypad designed to be used with gloves
- Hermetically sealed non-contact hook sensing switch improves system reliability
- Built-in External Ringer that provides penetrating calling signal (85dbA@ 1meter)
- Mounting: Wall/column/structural
- Captive cover screws prevent loss during installation
- Dimension: Approx. 246*339*126mm (H*W*D)
- Weight: 8Kg. (Approx)



TECHNICAL SPECIFICATION