New style automatic waste paper baler recycling machine waste paper baling machine

Technical Specifications

Product workflow:

1. After the paper wrapper or other materials of the waste paper baler arrive at the position, press the tightening button on the remote control, the red alarm light blinks, and the indenter will automatically advance and stop after pressing in place. After stopping for a few seconds, it will return to the position automatically after continuing for dozens of seconds.When returning, the siren will alarm with a frequency of 1 second. At this time, the arm type will be reported automatically. Click the arm on the remote control to loosen the arm. No more alarms until normal.

2, put the magnetic switch on the remote control into the card slot, press the system start button on the remote control 2 times, the warning siren sounds for 10 seconds, the warning device is suspended for preparation, and the red warning light is always on.

3. Before starting, consider whether the appearance of the waste paper packing machine is abnormal, whether there are hidden dangers around it, and whether the iron wire or plastic rope is sufficient.

4. After the task is completed, press the remote control system stop button, remove the magnetic switch, press the emergency stop switch of the electric control box, and block the main power supply. 5.Press the start button of the delivery belt on the remote control, the delivery belt runs, push the paper or other materials into the inlet of the delivery belt, the delivery belt brings the material into the packing inlet, and the manual arm type presses the sides of the holding arm with jacks. The screws on both sides are rotated at equal distances to enter some, and then tightening is started until the alarm is not normal.

Features:

Usage of Large-sized Full Automatic Balers

Specialized in recycling and compressing the loose materials like waste paper, cardboards/cartons, cartons trims, waste books, magazines, plastic film and straw etc.

FAQ

1) Are you a factory or trade company?

We are manufacturer with own factory for 15 years, export proportion 70~80%.

2) How can i trust your company?

a. With professional design and sales team, we can serve you the perfect solution with lowest cost.

b. Assessed by third party, national patents for all equipment, also CE, ISO.

c. Agents in RU, UKR,MYS,PH; Users around the world.

d. Welcome to inspect anytime. We are near to Shanghai airport.

e. About the machine, we do much better on:

Wear plates, seals, structure design, pressure head.

3) How about the test running & installation?

Before delivery, we finish the test over 3times.

If you take integral design, no need to installation at all. If parted design, we can send our technicians to your place if necessary.

4) Any warranty?

Under the proper usage, one year for whole machine except the wear parts.

5) Is your price competitive?

Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.