Solid Copper 4 Pair 8 Cores Flexible Network Cable HDPE Insulated PVC Sheathed Cat 5e UTP Lan

1. Application

The product is mainly used in the horizontal wiring of the work area, suitable for home, engineering wiring,

network equipment connection, etc., to meet the requirements of voice, integrated service data network

(ISDN), ATM-25/51/155Mbps, 10BASE-T, 100BASE-TX/T4, Multiple protocol applications such as 1000BASE-T.

2. Production Parameters

3. Company Certificates

YD/T 1019-2013,ANSI/TIA-568-C.

4. Product advantages

1. The conductor is made of high-quality oxygen-free copper, the insulation is made of imported HDPE, and

the wire is environmentally friendly.
2. The product adopts tandem production line, drawing insulation and integral molding, with a concentricity of

more than 90%.
3. Reduced attenuation and less crosstalk. The maximum transmission rate is 100Mbps, which supports duplex

applications.
4. Both high frequency performance and low frequency performance meet the requirements of relevant standards.

▼ Company information:

30 years of experience in R & D, production and sales of wire and cable.

Invest 200 million to build a modern industrial park, covering an area of 65000 square meters.

Annual revenue is about 500 million US dollars.

CNAS laboratory, more than 100 testing reports.

Products are widely used in real estate, municipal, industrial support, mobile communications etc

3S Safety Cable Advanced Institute of Technology with 7 laboratories, has been established in Finecredit

Group, including Electrical Performance Laboratory, Mechanical Performance Laboratory, Combustion Test

Laboratory, High Frequency Laboratory etc. Equipped with over 50 advanced equipment and technologies.

We are capable of meeting the most strict delivery schedules according to per purchase order. Meeting the deadline is

always the top priority as any delay in the delivery of cable can contribute to overall project delay and cost overrun.
Cable is supplied in wooden reels, corrugated boxes and coils. Cable ends are sealed with BOPP self adhesive tape and

non-hygroscopic sealing caps to protect the cable ends from moisture. The required marking shall be printed with a weather-proof

material on the outsides of drum according to customer's requirement.