Automatic Full Stainless Steel For Municipal Waster Water Treatment

Product introduction

Folding screw sludge thickener inherited the folding screw sludge dewatering machine of low energy consumption, high efficiency, automatic control, stable running and other technical advantages, can be directly to the second pond sludge pond sludge rapid continuous enrichment, separation and enrichment of sludge concentration is adjusted, within the range 90% ~ 96% after using the device without construction of thickener, reduce construction investment and covers an area of, effectively reduce the sludge concentration pool of stench and phosphorus release, reduce the workload of subsequent processing, and greatly improve sludge dewatering and the depth of dewatering equipment capacity.

Parameters of conch sludge thickener

1.Conch sludge thickener is a new type of solid-liquid separation equipment which USES the principle of spiral extrusion, the strong extrusion pressure generated by the change of pitch, and the tiny gap between the floating ring and the fixed ring to realize the extrusion and concentration of sludge.

2.Under the action of the screw shaft, the sludge is raised to the sludge outlet step by step, and the filtrate flows out from the gap between the fixed ring and the floating ring.

Advantages

of bentonite filter press

1.Wide range of sludge concentration, suitable for sludge moisture content range of 98%~99.8%

2.The moisture content of sludge can be adjusted in the range of 90%~96% after concentration

Scope of use

As the pretreatment equipment of sludge deep dewatering system, it is equipped with high pressure plate frame filter press, diaphragm filter press and other equipment.

Replace the sludge thickener as the pretreatment equipment of the sludge dewatering system;

For other concentration or solid-liquid separation processes.

Asked Questions

1.Q:Please tell us the following information so that we can make you the offer

Filteration area:_____m²

Raw material: _____

Capacity:_____t/h or cbm/h
PH value:_____ ,

Temperature:_____

Solid-liquid rate (Percentage of solids ) _____
Other requires: _______________

2.Q: Are you a manufacturer or a trader?
We're a professional and experienced manufacturer located in Sichuan about 20 years.

3.Q: Can you accept OEM?
Yes, we can produce the machinery totally according to your design (best with drawing).