Yag Laser 300watts 400watts 500 Watts Mold Repair Mould Welding Machine For Metals

Introduction

Equipped with industrial touch screen control system, the welding joints diameter is only 0.2-0.5mm. No deformation and the material can be etched without any damage. No trachoma, no stomata with smooth welding edge. You can re-use the original mold after repair, which will greatly improve efficiency and reduce cost.

Domain laser, offering laser application solutions, its laser welding machine series has been developed for more than 10 years. Self developed and core international key parts,the welding machine with lowest failure rate win trust from customers at home and abroad. You are sure to be satisfied with our welding machine.

Feature

Laser welding is to irradiate a high energy density laser beam on two parts of the material, so that the local heating melt, and then cooling and solidification into one. Compared with traditional welding technology, laser welding has the following advantages:

Small heat-affected zone of laser repair welding will not lead to deformation of precision die, large welding depth, strong welding, sufficient melting, no repair marks, no depression in the joint of molten pool melt bump and matrix.

With a special microscope observation system for cross cursor, the magnification can be adjusted to achieve precise alignment.

Application & Material

Applicable Industry:

Widely applied in the fields of aeronautical and space, mechanism, electron, communication, dynamic,Chemical, automobile manufacture and other industries.

The welding of automobile spare parts, such as hydraulic pressure jib, gasoline cleaner, left gas sensor,Electromagnetic valve, and drive starting stator.

The close welding of lithium ion batteries, such as mobile phone batteries and power batteries.

In metallurgy industry, such as silicon steel plate welding.

The welding of engine and engine lamina in application military industry.

The precise spot welding of the electronic components and close welding of relay.

In electrical equipment industry, such as silicon steel sheet welding, the rotor of the airconditioner Drive welding, and creepage protection welding.

Applicable Materials:

Materials that can be welded are extensive: cold work alloy steel, hot work alloy steel, nickel tool steel, steel alloy, high tenacity aluminum alloy, etc. Other metals like gold, silver, brass, aluminum-magnesium alloy, titanium, and platinum are also applicable.

Parameter