PoE++ 802.3bt (90W) 8 Port Rack Managed Network Switch
This is Gigabit Managed 10-port,L2 Gigabit Ethernet 90W PoE Ring Switch.
- IEEE802.3af/at/bt compliant up to 90W PoE power on 8 copper ports for total power of 720W to provide power for the most demanding PoE applications for PTz domes, LED lighting and wireless products
- Compliant to G.8032 ERPS V1/V2 Ring protocol
- uniquely designed for outdoor enclosure applications with a ribbed temperature disbursement chassis ,6kv surge protection and user programmable port thermal protection of over temperature shut down to prevent damage from excessive heat

Features
- 8x 10/100/1000Base-T RJ-45 and 2x 100/1000/2500Base-T SFP Fiber
- 2 Copper/MSA Fiber Combo ports
- Cable diagnostic, Measuring cable normal or broken point distance
- Supports Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet) management to optimize the power Consumption
- STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) for redundant cabling
- DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option 82
- QoS, Traffic classification QoS, CoS, bandwidth control for Ingress and Egress, Storm Control
- IEEE802.1q VLAN, MAC based VLAN, IP subnet based VLAN, Protocol based VLAN, VLAN translation, GVRP, MVR
- Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
- IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2
- Security : Port based and MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
- Software upgrade via TFTP and HTTP, redundant firmware to avoid in case of upgrade failure
- Supports IEEE1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End
- Transparent Clock, Master, Slave mode by each port
- RMON, MIB II, Port mirroring, Event syslog, DNS, NTP, IEEE802.1ab LLDP
- Supports IPv6 Telnet server /ICMP v6
- CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management
Specification
Product Name | 10/100/1000Mbps Managed Industrial POE Fiber Switch(2F+10TP) |
Port | 2 x 1000Mpbs SFP port, 1G/2.5G both supportive SM: 1310nm/1550nm,20Km; 1490nm/1550nm, 40~120Km; MM: 1310nm, 2Km; 850nm, 500 meters 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
VLAND ID | 4096 |
Jumbo Frame | 9.6KB |
MAC Address | 8K |
Switching features | Transmission mode: Storage and forward System bandwidth: 58Gbps (non-traffic jam) |
Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port, transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km |
LEDs | Power, network, fiber, POE, alarm |
Power supply | POE power supply input voltage: 48V (max 57V) Single PoE power supply output power: 15.4W/30W/60W/90W(port 1~8) |
Application
- Supply power to power-hungry devices
- Optical Telecommunication
- Remote controlling and monitoring
- Outdoor CCTV security surveillance
- Broadband private network
Dimension