10G SFP+ Unmanaged Media Converter
Introduction to Network Media Converter
Product model: TA810-10G-E, it is fine to write your model name
Standards | 1000Base-T, 2.5GBase-T, 5Gbase-T, 10Gbase-T 1000Base-X, 2500Base-X, 5GBase-R , 10GBase-R |
Media Supported | 1000Base-T: Cat5 UTP/STP. MAX 100m 2.5GBase-T: Cat5e UTP/STP. MAX 50m 5GBase-T: Cat5e UTP/STP. MAX 50m 10G Base-T: Cat6a UTP/STP. MAX 50m |
Port Type | RJ45, SFP Slot |
Work Mode | 1000Base-T to 1000Base-X 2.5GBase-T to 2500Base-X 5Gbase-T to 5GBase-R 10Gbase-T to 10GBase-R |
Support Modules | 10GBASE-SR/LR/ER/ZR 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 300m 9/125μm single-mode fiber optic cable, up to 10/40/80km |
Power Supply | 12V DC |
Power consumption | MAX 5W |
Operation Temperature | 0℃ to 55℃ |
Relative Humidity | 5% to 80% (non-condensation) |
Interface of Unmanaged Media Converter
LED Description of 10G Media Converter
LED | Status | Description |
PWR | On | Power is on and normal. |
FX Link/Act |
On | Connection status display for Fiber Link. “ON” indicates that Fiber link is in correct connection. |
Blink | Active status display of fiber link. “Blink” indicates packet goes through FX end. | |
SD | On | Fiber signal is detected. |
10G | On | Transfer rate of electric interface is 10Gbps. |
Off | Rate of electric interface is 10Mbps. | |
TX Link |
On | Connection status display for electric link. “ON” indicates that electric link is in correct. |
TX Act |
Blink | Active Status display of fiber link “Blink” indicates packet goes through TX end. |
Application of Fiber Ethernet Converter