Mini 6 port gigiabit ethernet switch poe switch din rail

2 sfp+ 4 RJ45 DC48-52V dual power input

Key Features of Gigabit POE Switch

• Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
• POE output power 15.4W/30W/60W for 1 ~ 4 RJ45 ports
• 4 x 10/100/1000Mbps Auto-sensing RJ45 ports, 2 x 1000Mbps SFP fiber port
• 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
• Support Auto MDI/MDIX
• Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
• IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant A store-and-forward switching mechanism
• Operating environment temperature: -40 ° ~75 ° c

Specification of Industrial Full Gigabit Switch

Application of 6 port din rail switch

Dimension of unmanaged gigabit switch

Packing box of Din rail unmanaged switch

1. Put the product in an ESD Bag, then placed in PE foams with outer carton packaging.

2. The standard packing usually contains a main device, a warranty card and a user manual.
3. Packing box dimension for 1pc: 23*16.5*5.8cm
4. 40pcs in a packing box of 67*33*47cm dimension.

FAQ:

1. What is the input voltage?

A: For PoE switches, it is DC48V~52V.

For non-PoE switches, it is DC12V~52V.

2. What is the power budget?

A: Each PoE port supports 15.4W/30W/60W output.

The default output is 30W(please let us know if you need 60W type)

The total budget: output watts of each port times PoE ports

3. Is it managed?

A: No, this series is unmanaged.

We have another managed series for your choice.

4. What installation method does it support?

A: It supports Din Rail and wall mounting.

If a special mounting kit is required, it is OK, we dealt with it before.

5. Does the fiber port support 100M speed?

A: Yes, for 100M models, it just supports 100M modules.

For Gigabit models, the fiber port is 100M/1000M auto-adaptive, you can insert 155Mb/s or 1.25Gb/s modules, both will work.