90w gigabit poe extender 1 Port 802.3bt PoE++ to 4 Port 802.3af/at
Industrial power extender repeater
Key Features of Gigabit POE Extender
Specification of 5 port Industrial poe repeater
Product Name | 10/100/1000Mbps Industrial PoE/PD Ethernet Switch(5TP) |
Model No. | IM-WPD054GE |
Port | 5 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
Protocol | IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) IEEE 802.3af 15.4W(POE) IEEE 802.3at 30W(POE+) IEEE 802.3bt 90W(POE++) |
Switching features | Transmission mode: Storage and forward Forwarding delay: <10us System bandwidth: 10Gbps(non-traffic jam) Forwarding rate: 14.88Mpps MAC: 2K Packet buffer size: 1.75Mb |
Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
LEDs | Power, network PWR: Power Copper orange: Speed indicator On:Working speed is 1000Mbps Off:Disconnected or working speed is 10/100Mbps Copper green: Link/Act indicator On:transmission is normal Blinking: in transmission Off:transmission is NOT normal |
Power supply | Single PoE input power: 30W/60W/90W(port 5) Single PoE output power: 15.4W/30W(port 1~4) Single PoE output voltage: DC48V(port 1~4) |
PoE wiring | PoE af/at: 1/2 (V+), 3/6 (V-) PoE bt: 1/2 (V+), 3/6 (V-), 4/5 (V+),7/8 (V-) |
Environment | Working temperature: -40°~75°C Storage temperature: -40°~85°C Working humidity: 10%~90%, non-condensing Storage humidity: 10%~95%, non-condensing |
Industry Standards | ESD:IEC61000-4-2,±15KV air, ±6KV contact EFT:IEC61000-4-4, General ±6KV Surge: IEC61000-4-5,Differential ±2KV, Common±6KV |
Certification | CE-EMC: EN 55032:2015+AC:2016+A1:2020+A11:2020 EN 55035:2017+A11:2020/EN IEC 61000-3-2:2019/A1:2021 EN 61000-3-3:2013/A2:2021/AC:2022 CE-LVD: EN IEC 62368-1:2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B (Class B) ANSI C63.4:2014 |
Mechanical information | Shell: Corrugated metal shell, Safety class: IP40 Dimension: 114*93*35mm, Mounting method: Din-rail/Wall mounting |
Warranty | 3 years |
Application
Packing box of Din rail unmanaged switch
Put the product in an ESD Bag, then placed in PE foams with outer carton packaging.
FAQ:
1. Q: Does this industrial 4-port PoE extender support 24VDC power output?
A: No, this product doesn't support passive 24VDC PoE devices, and it supports standard IEEE802.3af/at PoE 48VDC devices only.
A PoE splitter is required if you need to connect a 24VDC based PD device.
2. Q: Is it a managed industrial network switch?
A: It is unmanaged industrial PoE switch and no need any setting, plug and play, easy to use.
3. Q: Can I use it with one Non-PoE devices?
A: Yes, sure. If one Non-PoE devices is connected with this industrial 5port PoE switch.
The industrial 5 port PoE switch will provide data only, and don't provide power any more.
4. Q: Can it work with 10/100Mbps devices?
A: Yes, Ethernet port speed is auto-adaptive, it is seamless connection with extra settings.