Mild Steel A142 /A393 Reinforcing Mesh with size 6.2m x 2.4m

Mild Steel A142 /A393 Reinforcing Mesh

Welded reinforcing mesh also known as welded wire reinforcement, is a kind of mesh reinforcement. Reinforcing mesh is a highly efficient, economical and flexible for concrete reinforcement, greatly save the construction time and reducing the labor force. It is widely used in road and highway construction, bridge engineering, tunnel lining, housing construction, floor, roof, and walls etc.

A142 Mild Steel Mesh is used widely across a range of industries and sectors. Reinforcing Mesh is most often used in the construction industry for reinforcing concrete slabs in floors and other structures. A142 Steel Mesh is usually lowered into concrete as it sets, the concrete will then grip the A142 Mesh making it more tensile and robust. Steels have a very similar coefficient to that of concrete, this helps to reduce internal strains caused by a change temperature, helping to make a strong robust material.

A142 Specifications:

Wire thickness 6mm

Mesh Aperture Size (square size) 200mm x 200mm

Sheet Size 2400mm x 1200mm

A393 Reinforcing Mesh

Main Wires: 10mm

Cross Wires: 10mm

Mesh Size: 200mm x 200mm

Weight: 6.16 Kg/M2

Types of welded concrete reinforcing mesh

• Square opening steel reinforced mesh: This mesh has stainless wires that run vertically and horizontally supporting each other while forming small squares.

• Rectangular steel reinforced mesh: This mesh has stainless wires that run vertically and horizontally supporting each other while forming smaller rectangular shapes.

• Welded steel reinforced mesh for building vertical walls.

• Customized types, also known as special steel reinforced mesh.

Features

• There are different diameters of steel reinforcing mesh each suited for a particular application.

• The welded wire fabric makes them easier to work on.

• There are different designs of steel reinforcing mesh from bent and rolls to flat sheets.

• As per BS 4482 standards and codes, the stainless steel wire used in the manufacture of the steel reinforcing mesh has a 510MPa tensile strength and 485MPa minimum proof stress.

Square Mesh AS/NZS 4671- Class L

Rectangular Mesh AS/NZS 4671 - Class L

A142 /A393 Reinforcing Mesh-001

A142 /A393 Reinforcing Mesh-002