Hardened 8 Port POE Managed Network Switch With IP40 Aluminum Case
Managed Network Switch Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 4-Port 1000X SFP
Managed PoE Switch Advantages
► Support 8x10/100/1000Base-T + 4x1000Base-X SFP
► Support connecting USB-C port for easy management, without the need to access the RS232 serial port at all
► IP40 Aluminum Case
► Supports DIN-Rail installation
► -40°C to 80°C (-40°F to 176°F) operating temperature
8 port 10/100/1000M PoE Switch Overview
ETH-IMC408MP Series is the L2+ managed 8-port 10/100/1000Base-T 802.3at PoE + 4-port 1000Base-X SFP hardened Ethernet switch. The Switch has 8 Gigabit Ethernet ports and 4 SFP fiber ports. TP (RJ45) supports 10/100/1000Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X connection; 1000Base-X supports 1 or 2 core Single-mode or Multi-mode fiber.
Din Rail Managed Network Switch Technical Indexes
Connector: | 8 x RJ45 | |||
RS485: | 1 x RS485 (Optional) | |||
Optical Port: | 4 x 1000Base-X SFP | |||
USB-C: | 1 x USB-C (for Management) | |||
Data type | 1Ch RS485 Bi-Direction | |||
RS-485 signals | Data +, Data-, GND | |||
Standard: | IEEE 802.3at Power over Ethernet Plus | |||
IEEE 802.3af Power over Ethernet | ||||
Port: | 8 x RJ45 | |||
Power Pin Assignment | 4/5(+), 7/8(-) | |||
PoE Budget: | Up to 240-watt PoE budget | |||
Operating Temperature: | -40°C to 80°C (-40°F to 176°F) | |||
Storage Temperature: | -40°C to 85°C (-40°F to 185°F) | |||
Input Power: | 48~57VDC, Redundant Power (6-pin Terminal Block) | |||
Power Consumption: | 8W Max. (PoE in Use<240W) | |||
DIP Switch | ||||
4-digit DIP switch function | DIP | Function | Settings | |
SW 1 | VLAN | ON - Enabled | OFF - Disabled | |
SW 2 | Ring Management | ON - Enabled | OFF - Disabled | |
SW 3 (to be upgraded) | 250m PoE Network | ON - Enabled | OFF - Disabled | |
SW 4 (to be upgraded) | PoE Reset | ON - Enabled | OFF - Disabled |
Industrial 8 Port Network Switch Ordering Information
Model | Description |
ETH-IMC408MP | Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 4-Port 1000X SFP Managed Ethernet Switch |
SFP Options | SFP option. Please select your SFP on our SFP Options Page |
SFP module is to be purchased separately. | |
Mounting Options | Default DIN-Rail Bracket installed |
Power Options | DIN-Rail Power Supply. Open Wire for Terminal Block. |
Power Supply is to be purchased separately. |