System information : View software version, CPU utilization, memory utilization

Network Settings: Configure the management address of the device

User Configuration: Configure user name, password

Log configuration : View and download logs

TELNET configuration : TELNET service enabled, disabled

HTTPS configuration : HTTP / HTTPS feature enabled, disabled

Diagnostic test : PING, TRACEROUTE function

Physical port configuration: Port rate, flow control mode, the maximum frame length

Storm suppression :Configuration broadcast, unknown multicast, unknown unicast pass rate

Port speed limit : Configuration entry, exit rate, burst rate

Port mirroring: Supports up to four mirrors

Link Aggregation: Supports up to 16 static LACPs and supports dynamic LACP

Port isolation : Supports up to eight groups of Uplink, Downlink isolation

Port statistics

VLAN configuration : Port working mode, PVID, tag / untag list configuration, VLAN creation

Mac-vlan

Protocol-vlan : Supports VLANs based on ETHERII, SNAP, LLC frame types

Voice-vlan

MAC configuration: Static MAC configuration, dynamic MAC query

MSTP configuration: Supports STP, RSTP, and MSTP (802.1s) protocols

IGMP snooping : Supports static multicast configuration

DHCP-snooping : Support static binding, arp dynamic detection, ip source address check

ERPS-Ring configuration

GMRP configuration

The mld-snooping configuration : Supports the ipv6 multicast configuration

The Gvrp configuration : Supports dynamic vlan creation

The interface configures : he IPv4 address configuration of the Layer 3 interface

ARP configuration : Static ARP add, ARP aging time settings, view system ARP information

VRRP configuration

ND configuration : Static ND configuration

View routing: Routing information

Static configuration: Adds a static route

RIP configuration

OSPF configuration

BGP configuration

Access Control: Set the access rules for this device

Anti-attack Set : PING message discarded, DOS attack, CPU receives the message rate setting

ACL configuration: Based on MAC and IP ACL configuration, you can configure the ACL to take effect

802.1x authentication configuration

QOS configuration :Support SP, WRR, DRR scheduling configuration;

8 send queues per port mapping 802.1p 8 priority;

Support DSCP queue mapping;

The LLDP configuration

SNMP configuration :Supports SNMP v1, v2c, v3

RMON configuration

DHCP Server configuration

DHCP relay configuration

DNS settings

NTP settings

NAT settings

Configuration file management

Save configuration : Configuration file view, upload, download

Reboot the device

reset

Online upgrade

European Community (CE) Electromagnetic Compatibility Directive:This equipment has been tested and found to comply with the protection requirements of European Emission Standard EN55022/EN60555-2 and the Generic European Immunity Standard EN50082-1.

EMC:

EN55022(1988)/CISPR-22(1985),class A EN60555-2(1995),class A

EN60555-3

IEC1000-4-2(1995),4K V CD, 8KV, AD

IEC1000-4-3(1995),3V/m

IEC1000-4-4(1995),1KV – (power line), 0.5KV – (signal line)