PoE Power Splitter Industrial 10 100 1000Mbps 802.3bt 95W Power Over Ethernet 36VDC Output
PoE Power Splitter Advantages
► Splits power and data from PoE Input
► One RJ-45 PoE Port (Data & Power In)
► One RJ-45 Port (Data Out)
► One 36VDC Output (2-pin Terminal Block)
► Support IEEE802.3af/at/bt PoE++
► Support 10/100/1000Base-T
Technical Indexes
Ethernet | |
Standards: | IEEE 802.3 10Base-T Ethernet |
IEEE 802.3u 100Base-TX Fast Ethernet | |
IEEE 802.3ab 1000Base-T Gigabit Ethernet | |
IEEE 802.3af Power over Ethernet | |
IEEE 802.3at Power over Ethernet Plus | |
IEEE 802.3bt 4-pair Power over Ethernet | |
Processing Type: | Forward |
Half-duplex, Full-duplex | |
Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Cabling: | 1000Base-T: Cat5 or above |
Maximum Distance: | Cat5 UTP up to 100m |
Interface: | “PoE (Power + Data)” Input Port: 1 x RJ-45 10/100/1000Base-T |
“Data” Out Port: 1 x RJ-45 10/100/1000Base-T | |
DC Out Plug Connector: 1 removable 2-Pin terminal block |
Overview
LNK-INS901-36V series is an Industrial Grade, Gigabit Ethernet, PoE Splitter, designed to deliver data, via RJ-45 Ethernet connector, and electrical power, via screw terminal block, to non-PoE devices. This device saves the high cost of running separate electrical service to edge devices.
Ordering Information
Model | Description |
LNK-INS901-36V | Industrial IEEE802.3bt Gigabit PoE Splitter Output Voltage 36VDC, maximum output of 70W at 36VDC, Support DIN-Rail mounting and Wall mounting installation, -40 to 80°C operating temperature |
Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |