8 Channel 3G-SDI Video Fiber Converter with 10G Ethernet Port support Loop out
SDI Fiber Converter Advantages
Overview
E-link LNK-3G8V10GE 3G-SDI & Ethernet fiber extender provides transmission of one 3G-SDI channel with 10G Ethernet IP channels over single mode optical cables. This SDI and IP to optical fiber converter enables high optical performance and brilliant HD video processing in real time. IP interfaces can dramatically increase scalability and compatibility with all modern high-end networking systems.
Order Information
Model | Description |
LNK-3G8V10GE | 8Ch 3G-SDI Fiber Converter with 10G Ethernet and loop out, SMF, LC Fiber Connector 20KM, including Transmitter and Receiver, used by pairs |
Specifications
Fiber Optical interface | |
Fiber interface | Simplex LC |
Transmission distance | 20Km |
Wavelength | 1310nm/1550nm |
Video | |
Video interface | BNC |
Video input/output impedance | 75Ω |
Video input/output voltage | Typical:1Vpp, Min 0.5Vpp, Max 1.5Vpp |
Video Bits Rate | Max 3.2Gb/s |
Differential gain (10%~90% APL) | <1% |
Video SDI standard | 270Mbps (SD-SDI), 1.485Gbps/M(HD-SDI) |
SMPTE425M3Gb/s Mapping(3G-SDI) | |
SMPTE424M 3Gb/s serial interface(3G-SDI) | |
Video Input | 8 Channel with Loop Out on TX |
Video Output | 8 Channel with Loop Out on RX |
Ethernet | |
Standards | IEEE 802.3u 100BASE-TX |
Interface | 1 x 10G/5G/2.5G/1G/100BASE-T RJ45 |
Working mode | Auto-negotiation by default |
Electrical | |
Power Input | 100VAC to 220VAC |
Power consumption | <12W |
LED Indicator | |
PWR | Power Supply |
SDI 1~8 | 3G-SDI Signal |
ACT | RJ45 Ethernet Signal |
LINK | Link Status |
Mechanical | |
Dimensions (LxWxH) | 483 x 270 x 45mm (19inch 1U) |
Weight | 8KG/pair |
Casing | Metal Case |
Mounting Options | Rack-mount |
Environmental | |
Working Temperature | -20℃~+70℃ |
Storage Temperature | -40℃~+80℃ |
Working Humidity | 0~95% |
MTBF | ≥100000 hours |